Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
I have a 308 AR barrel that I believe has a extension that has the feed ramps cut wrong. It jams tips of bullets into breech and will not chamber round. I have tried different combos of mags uppers and lowers and have come to the conclusion it is the extension itself. I am looking for a Smith...
I have an original, first run S&W 1911 that shoots amazing, but I’d like a few things done to it, and prefer someone local with a reasonable turn around time.
First I would like XS Big Dot sights installed, it currently has Novak 3 dot (non tritium) sights.
Second I would like the front strap...
I finally had some free time and got to do a bit of work this weekend widening the trail, and clearing out another 50 yards. That gets me to 425 yards!
As the title says, I'm looking for crimper dies for 38/357 and a 44 magnum. Prefer ones that work with my RCBS single stage. I say this as I don't know if all brands are interchangeable.
If you have an extra one let me know.
Thanks!
Making this thread to contribute to the knowledge base because I didn't have a lot of information when I was ordering this exact set up.
I have a new (to me) Savage 116 (round receiver w/ accutrigger) and I wanted to mount my Vortex Viper scope:
Vortex Optics - Viper HS LR 4-16x44 Dead-Hold...
I have a Ken Onion edition. It takes 3/4 x 12 in belts (bands)
What does anyone else buy for these?
Ecnonaway Seller
3M Trizact Type of Belt
Or the DAREX Industrial Drill Bit Sharpeners (Work Sharp company)
Something else?
Some reference here on NWFA tho I didn't get the answer I...
The old timers that know me well they have seen this from a small hole.. See Shop Remodel New CNC Machine & Shop Expansion – The Personal Blog Of Steven L. Rhine
Front..
Some Of The Welding Equipment.
My Parts Bench..
My Work Bench Set Up At the Portland Area Shows..
Click To Show...
No idea how many owners, so maybe a couple thousand rounds through it, in other words, just starting to get broken in. :cool:
3 new 10 round Ruger factory mags, 1 Butler Creek 25 round mag.
Bolt buffer has been replaced with a nylon buffer made from a 1/4-20x3" nylon bolt.
Brimstone Tier 3...
Recently picked up a 5" FNS, and while I like it a lot the trigger has a lot of room for improvement.
There is a place in NV that offers reducing the travel and lightening the trigger itself to about 4lbs for $200.
This seems a bit steep to me. Can any of you chime in?
And does anyone know...
I'm looking for some first hand recommendations for a skilled Cerakote job (Benelli m4) around the Portland/Tigard area. What considerations should I be aware of? What questions should I ask ahead of time? How do I separate the best from the rest?
I am a roofer for eds economy roofing in brush prairie WA. I am looking for some small side jobs to gather some cash for a new gun. My skill level is currently limited to straight sides of roofs or small patios and sheds etc. As i am a newer roofer i am inexpensive but if i dont feel comfortable...
Ken Onion Work Sharp in excellent condition. Not used much, still has original belts (4 ea), but they are ready to be replaced. Manual and instructional DVD included.
Only Trade for Streamlight TLR-1 HL.
Will have to ship due to my remote location.
I just have to have a HK P7M8 so my latest build is the funds to help me get there.
This is an UNFIRED Glock 19X. I sent the slide to ATEi for the RMR cut, RMR and sights. I did NOT have them refinish the entire slide in their PVD. Instead, I asked them to seal the metal for corrosion proof in...
*** SOLD ***
Up for grabs is a Smith & Wesson Model 500 of the 4" barrel variety. This one, however, has been gone through by their Performance Center, with some trigger work and unique matte black finish for a rare two-tone look. This pistol has approximately 50 rounds through it.
Also...
We will be accepting Applications for Steamfitter, HVAC/R and Plumber apprenticeship programs. Starting June 18, 2018 until July 2, 2018.
FB Links:
UA Local 290 Apprentice and Journeyman Training Institute
Security Check Required
I am guessing, but think this is a valid link
UA Local 290 |...
Not certain if this is appropriate or the proper location, but I just wanted to ask how everyone else's experience has been with RMA work with Smith & Wesson. I sent the firearm in to them in mid-March and never called to bug them once as to the status. I called today 5/14 to check on and it...
I'm not allowed to carry at work. It was in the new hire paperwork. I've always just left my pistol in my car in a lock box chained to the frame of my seat. However I feel like if something were to happen I'd rather risk losing my job than my life. We've had a few employees freak out after being...