Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
So I built an Aero M5 Ar10 18" with rifle length gas system. All Aero parts including aeros .750 adj gas block. Its perfectly strait as well, I blocked the chamber and put air compressor on the tube and there is tons of air movement, I have the gas block set to full open with in their paper work...
Recent legal issues are forcing me out of the game....so come and get it boys.. I will have pistols, rifles, a shotgun and a bunch of ammo posted over the next week or so to move...all transfer fees are on the buyer and I would like to stay local within reason to make this happen... Thanks guys!!
my safety selector while installed not engaging the selector switch ..
When screwed in it moves freely no resistance between safe and fire, will not engage binary
Any one have one of these you can post pics up or have this issue with install?
I have an appointment for an ultrasound steroid injection Monday morning.
If it doesn't work next stop is shoulder replacement.
Who's had the steroid treatment in their shoulder? Successful? Length of relief?
I've had problems most of my adult life with the shoulder and have finally reached...
Today I was shooting 4 rounds of Grizzly 460 gr +P ammo with my Henry 45-70 Lever Action and the rifle had a hard time ejecting empty shells. Loading and shooting was smooth, but to eject each empty shell I had to pull the lever really hard and do it multiple times. Any other ammo that I shot...
About 5% of the time, my firing pin assembly is coming free of the spacer sleeve and channel liner (I may have the terminology wrong), but I’m still seeing positive firing response and great (albeit stiff) extraction. After running some snap caps I pulled the slide off and saw this:
I don’t...
Loaded up a bunch of .45 ACP Large Primer, from brass I bought “pre sorted” as Large Primers. Made the huge error and last time I will “assume” correct sorting was done. Few shorty .45 GAP showed up, visibly got them. But after 3 large primer detonations from NOT fitting the small primer...
wow had 4 misfires all seem deep primer strikes enought to fire them? put all for back in the end of the video and they fired well i was shooting low too the right ,i had to shoot low do to the bush backstop i couldnt see the hits aiming at the plate
Just got a SilencerCo Saker 762 and installed the ASR muzzle device on my rifle using the provided shims. As you can see in the pic, the shim got jammed in there. Anyone else have the issues and how do you fix it? The Shims were really hard to get on the threads which I thought was odd.
I just put together a 6.5 grendel AR and it is extremely hard to chamber or extract a round, is this something that will just smooth out with use or is there something I can do to speed it along.
I have so far found only one source for these pieces, and they require a minimum order of 1,000 each, but I cannot justify ordering that many if I am not going to make a thousand pouches or 500 sets of straps :s0001:
I want to make a retro style QD shoulder strap set in Coyote Brown, or other...
Been thinking lately about finding a project revolver to work on and increase my skills. I've enjoyed working on my S&W to get it competition ready, feeling like I can probably manage most repairs on these short of re-barreling.
Wondering what is a good price range for something like a Smith or...
Took my RAR to the range today for the first time and only got it to fire three rounds, very disappointing. Was having light primer strikes, they would not touch off on the second attempt either. Not reloads, all factory ammo. I guess a trip back to Ruger is in order. After doing some reading...
Looking for some thoughts on what could be causing intermittent failure to extract issues on my little Star Super-SM .380 ACP.
Cartridges feed just fine, but every other round or so the empty case isn’t being pulled from the chamber after firing (see photo.) I’ve had the extractor inspected and...
Can anybody identify this bolt and carrier? Also, having issues ejecting. Empty doesn't eject and it picks up another round and jams up. Pistol is fairly new and it seemed like it was breaking in and correcting itself, then I cleaned it and the issue is back. Swapping bolts from another rifle...
I purchased an 80% AR10 lower from American Made Tactical and a complete 6.5CM upper from Aero Precision. Since the AP upper is high profile, will I run into issues with a standard DPMS Gen 1 lower?
Thanks in advance for any help.