Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
I've got a whole bunch of old (and not so old) American Rifleman issues, some going back to the 1940's. They were gifted to me a long time ago. I've got them all in 13" x 16" x 11" banker's boxes, 7 or 8 of them. I'm getting ready now to retire and move out of state, I don't really want to take...
So, my Taurus PT-1911 is locked up. I don’t know what happened. Fired first round of magazine then slide locked with a live round not quite in battery. It also has an issue with hammer follow that I would love to get fixed. Anyone recommend a smith that would be willing to work on this in...
I have a aero 308 16" barrel and lower, shoots perfect without the suppressor. With my rugged radiant brass gets chewed up, out of a 100 rounds had a couple failure to ejects and a couple brass caught in the ejector causing it to mangle the round. Factory rifle for the most part, non adjustable...
To avoid thread closure please keep this political thread focused on the issue of firearm freedoms and how we can protect them from the gun grabbers in Salem and around the State.
Oregon voters have a good opportunity this November to mitigate the damage that is likely to come next session if...
Welp, Brandon did it to us good this time, mandating the addition of MORE ethanol to our automotive fuel, bringing a host of major issues with it!
The U. S Coast Guard has issued a warning to all boaters, not only to NOT purchase gasoline containing more then 10% Ethanol, but that it's also...
Hi all,
Recently purchased a G45 MOS with a Holosun 509T on it. Overall everything works great EXCEPT that the mounting plate (Botach) is bent upwards (pics attached) and the screws are stripped.
Stripped screws aside, I am realizing I likely need to get a new mounting plate. I can use the...
Hey everybody, I got a(nother) Chinese Tokarev recently and took it out to the range, where I encountered an issue with the slide not going fully into battery, and getting hung up while closing. If I gave it a slap it would go into battery and function as normal. I tried this with different...
I have a CZ RAMI and when shooting it sometimes my trigger finger will become numb like it's been slapped several times. Any suggestions on what I may be doing wrong? Any help would be great. Thanks
Had a holosun hs407k on my p365xl
Sold the 365 and attempted to trade the optic to another member for a hs510c but received a text from the member the optic would not power on so went back out and traded back and now I'm looking at having to deal with a warranty repair.
Anyone dealt with those...
Do any of you have experience with their 147gr 9mm FMJ’s. I loaded up close to 1000 this past weekend and had continual OAL issues. The bullets varied as much as .035”!!! It’s a modest load and I have no worry about excessive pressure but was very disappointed in the consistency of them.
I ASSUME a thread-on, muzzle brake/flash suppressor device is entirely legal as long as it is solid and one piece correct?
Reason is I am going to machine one for my Ruger PCC. Mostly just as a hobby project and nothing actually necessary but I have been wanting to make one for it and I...
My daughter has first management job at auto-glass replacement place in Seattle. She previously alerted me to a glass shortage (auto and home).
This weekend she said there is a shortage coming soon on tires (rubber compound?). So if you need new tires...
Today I had an appointment with the Oregon DMV, to get the Real ID DL.
Had all my paperwork in hand, presented what I needed to, to the DMV guy and his first question was: When did you move to Canby?
Me, a resident of Hillsboro and have been since 2015, said: hmmm, I did not move
Him: hmmm...
Ok, so I’m an ex 67N20, and have messed with my fair share of M16A2’s!
I decided I’d build my first AR15 and that if I was going to do it , I’d go full Monte and start with an 80% Arms version!
This doesn’t have anything to do with the issue I had when sighting in!
I installed an MBUS front...
So over the past few years I've built around a dozen black guns with pretty good success. But a current build has me scratching my head.
The issue I'm having is failure to feed. Will eject a round but not cycle a new one. Tried multiple mags and 55 and 62gr. Running a BA Performance Series 16"...
I went shooting this morning and had a couple of "delayed" fires. Pull the trigger and a couple of a hundredths later, bang! Is this an ammo issue or an issue with my $200.00 trigger? I've got a couple hundred rounds on this trigger and it is sweet, except for this issue. Thanks a ton!
I bought an FN 509 C MRD this month. Haven't shot it yet because of the price of ammo. I bought it based on the good reviews, the feel of it when I inspected it at the store, and my desire to diversify my collection of pistols. However, after doing a bit more research, I read about some issues...
So I built an Aero M5 Ar10 18" with rifle length gas system. All Aero parts including aeros .750 adj gas block. Its perfectly strait as well, I blocked the chamber and put air compressor on the tube and there is tons of air movement, I have the gas block set to full open with in their paper work...