Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
Discuss firearms and all aspects of firearm ownership
Join others in organizing against anti-gun legislation
Find nearby gun shops, ranges, training, and other resources
Discover free outdoor shooting areas
Stay up to date on firearm-related events
Share photos and video with other members
...and much more!
project
In contemporary business and science, a project is an individual or collaborative enterprise, possibly involving research or design, that is carefully plan, usually by the project assigned team, to achieve a particular aim.
One can also define a project as a set of interrelated tasks to be executed over a fixed period and within certain cost and other limitations.
One can view projects as temporary (rather than permanent) social systems or as work systems that are constituted by teams within or across organizations to accomplish particular tasks under time constraints. An ongoing project is usually called (or evolves into) a program.
1982 Yamaha
Model XJ5
4 cylinder
Been sitting in my garage since 1998
Ran then, does not run now cannot even try starting
it without work.
This is a project. Clean out old gas
from tanks and carbs, replace the dead oil and filter,
get a new air filter and
Get a battery and then who knows?
It...
I want to build a Mosin-Nagant Obrez because I'm fascinated by something that is so goofy and impractical by today's standards but that served a legitimate purpose back when it was used. Plus, who doesn't like giant fireballs?
But I'm not an animal, so I'm not going to butcher a perfectly good...
For Sale or will consider interesting trade.
1982 Yamaha XJ550. AS IS. WYSWYG
It does NOT run. Needs restoration. As is. It has been sitting in my
garage for about 30 years. It needs complete
restoration or it can be used for parts.
In terms of parts, the individual items add up to...
Two full sealed Hornady .224 v max 60gr $25 each
1 full 50 gr v max $20
1 full 52 a max $25
One nosler 250 count ballistic tip 55gr $75
2 full Sierra 1360 .224 55 gr sp $22 each
Open boxes at top include if you buy whole package
All of them for $175
Call or text at 3609310464
Looking for a short action Savage rifle for a project. Preferring to stay away from the Axis line as they are more difficult to find the parts I want for them, so a 10/11/12/16 would be what I'm after.
A long action could be made to work if the price is right, so just let me know.
Not looking...
I purchased this from Classic Firearms earlier this year as a gunsmithing project (12ga AR-15 style shotgun) and unfortunately, I never got around to finishing it. It has a unique, sleek design, with a sturdy 7075 aluminum frame, an integrated rubberized grip, and an adjustable cheek plate on...
I have a 1982 datsun 720 kingcab it’s your average project car it drives it really just needs carb work and has some door rust starts up on cold mornings to will post picks later looking to sell or trade 2000 obo
1996 Yamaha Seca II
It has all the parts. It just needs to be reassembled... carbs, gas tank, airbox
$700
more pics in this link
https://portland.craigslist.org/mlt/mpo/d/portland-yamaha-xj-600-seca-ii/7486705800.html
1996 Yamaha Seca II
Needs reassembly. Its fair condition, a good...
You need this!!!
In need of a nail gun, this is for you. No need for an air compressor or any hoses to drag around.
Battery and charger in the box. Comes with 7 new gas cartridges capable of firing up to 1200 nails each. I don’t use and have no need to hang onto it. I’m not looking to make a...
WTS: Savage Project Rifle, it is currently chambered in 30-06 with an 18 inch Savage model 111 barrel that was cut down and recrowned. I can not attest that this was the original barrel or that the action belongs to a model 111 only that the barrel seems to fit. Selling AS IS as I did not have...
Helping my dad sell the old family Blazer they got new back in 91. Sure seen better days.
It is 4x4 so has the front differential still in it. Rear axle isn't rebuilt as far as I know. The bearings and gears sound and feel smooth and no wiggle.
Needs a lot of work but the frame is solid and...
Mechanically in good,safe operating condition...
Action and rifling are strong...
Owner before me attempted a free float job and it should be re-done for cosmetic reasons...
Cash or other trades available for trade offers over the advertised price...
Only trades considered: Firearms and...
Rifling’s are good,action is good...
Mechanically in good condition...
A bone head "not me" attempted a bedding job...
Looks like the bedding material could be dug out and redone...
So, I recently acquired a Spanish Destroyer Carbine. It is one of the rare variants (M1) made in the early 1960s that is chambered in 9×19㎜ Luger, rather than 9×23㎜ Largo (aka Bergmann—Bayard). The rifle should be, according to tracking, here on Monday, and I'll add pics to the appropriate...
Honda Hawk) - $450 (Salem)
1978 Honda cb400a
engine displacement (CC): 400
fuel: gas
transmission: automatic
I have 1978 Hondamatic Hawk 400 project for sale. It's mostly stock and ready to put back together or create into a cafe racer
It's been my tinkering bike for a couple years. It's...
(Honda Hawk) - $450 (Salem)
1978 Honda cb400a
engine displacement (CC): 400
fuel: gas
transmission: automatic
I have 1978 Hondamatic Hawk 400 project for sale. It's mostly stock and ready to put back together or create into a cafe racer
It's been my tinkering bike for a couple years. It's...
Up for sale is a barreled AK assembly I bought a few years ago and I just never got to it. I bought it from Wolfpack Armory who said it's built from Romanian parts on a Morrissey receiver.
7.62x39mm
16" barrel (MFG unknown but I suspect AK builder or GMG)
New production WASR HG (couple dents...
Selling a 1942 Mosin Nagant 91/30. It's all matching except the bolt.
I believe the former owner wanted to convert it to a faux PU sniper, since it has a curved bolt, and two elongated bolts through the receiver which I assume was for a scope mount. The trigger is very light as well, so I...
Hello everyone, looking to trade my SL 100 project, I belive I have all the parts, I’m just not good at reassembling these things. Looking for potentially a firearms trade and /or optic or something similar. I’ll try to post pictures as soon as I can, or PM me for some.
Perusing the inventory at a local gun store a Century Arms Draco caught my eye. "That would make an excellent SBR," I thought to myself. A few YouTube videos later when I got home and the seed was planted.
Over the holidays I purchased a Draco HG1916-N from Atlantic Firearms. Before I...