- Messages
- 1,897
- Reactions
- 971
Have a offer to trade for the following Mark Morris custom built Para P-13 Commander with the following upgrades
Morris TKO rear sight & cross dovetail front sight
High grip beavertail grip safety (with bump)
Tactical ambidextrous safety
Match hammer and sear
Videcki match trigger
4-5# trigger job for carry
Morris Storm Lake stainless match barrel and bushing
Tighten slide to frame
Full length guide rod
All reliability work, including:
a) lower and flare ejection port
b) polish breech face
c) polish out mill marks inside of slide
d) modify slide to extract live round safely
e) throat barrel and polish feed ramp
f) extended ejector
g) polish, shape and adjust extractor
h) polish disconnector race
Bevel magwell
Radius all sharp edges
Black micarta grips
Protective crown on barrel
Steel Colt mainspring housing
See attached thumbnails for pics of the 1911
I would be trading my FN Hi Power for this with the followng
This gun was originally built by Jess Gypin from On target Customs
Metalloy Satin Hard Chrome finish
C&S Sear and Hammer installed
C&S extended Slide Stop
Custom front and back strap stippling
Full tune and reliability package
Install low mount combat Novak Sights.
Two Tuned Mages
5.5 lb trigger job
Mag safety removed
Esmeralda two tone blond/red cocobolo grips
I recently sent the gun to renowned pistol smith Don Williams at the action works to have the following done. (Receipt Available)
Trigger Job reduced trigger pull to 4.5 Lbs
Install and sight in Novak 3-dot low mount combat night sights.
Test fire and adjust as required.
Morris TKO rear sight & cross dovetail front sight
High grip beavertail grip safety (with bump)
Tactical ambidextrous safety
Match hammer and sear
Videcki match trigger
4-5# trigger job for carry
Morris Storm Lake stainless match barrel and bushing
Tighten slide to frame
Full length guide rod
All reliability work, including:
a) lower and flare ejection port
b) polish breech face
c) polish out mill marks inside of slide
d) modify slide to extract live round safely
e) throat barrel and polish feed ramp
f) extended ejector
g) polish, shape and adjust extractor
h) polish disconnector race
Bevel magwell
Radius all sharp edges
Black micarta grips
Protective crown on barrel
Steel Colt mainspring housing
See attached thumbnails for pics of the 1911
I would be trading my FN Hi Power for this with the followng
This gun was originally built by Jess Gypin from On target Customs
Metalloy Satin Hard Chrome finish
C&S Sear and Hammer installed
C&S extended Slide Stop
Custom front and back strap stippling
Full tune and reliability package
Install low mount combat Novak Sights.
Two Tuned Mages
5.5 lb trigger job
Mag safety removed
Esmeralda two tone blond/red cocobolo grips
I recently sent the gun to renowned pistol smith Don Williams at the action works to have the following done. (Receipt Available)
Trigger Job reduced trigger pull to 4.5 Lbs
Install and sight in Novak 3-dot low mount combat night sights.
Test fire and adjust as required.