Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I can see the next office party.. instead of copying butts,.. guns! Brilliant!A friend pointed out that if somebody sent 3D gun files to the WA AG, that they would become a public record. I can't find any exemption in the law that would allow them to not share these files, so I emailed a file for the 3D printable Liberator file to the WA AG.
It is now public record, and they should have to send it with a public records request.
Next step is to send a physical flash drive with all manner of 3D gun files to them, which also becomes a public record, and the contents have to be released on request.
Bonus points, the drive will be preserved in the state archives after a few years...
Somebody needs to send them Both a Bunch of Ads for the 80% Tooling and Any other Guns Related goodies!!!
Maybe give him a Membership in the NRA and Washington Arms Collectors and don't forget the Second Amendment Foundation - I'd chip in a couple of $$$!!!
How about a Membership at a couple of the Indoor Gun Ranges and you need to include a few Outdoor Ranges!!!
You might even make then Family Memberships!!!
A friend pointed out that if somebody sent 3D gun files to the WA AG, that they would become a public record. I can't find any exemption in the law that would allow them to not share these files, so I emailed a file for the 3D printable Liberator file to the WA AG.
It is now public record, and they should have to send it with a public records request.
Next step is to send a physical flash drive with all manner of 3D gun files to them, which also becomes a public record, and the contents have to be released on request.
Bonus points, the drive will be preserved in the state archives after a few years...
A friend pointed out that if somebody sent 3D gun files to the WA AG, that they would become a public record. I can't find any exemption in the law that would allow them to not share these files, so I emailed a file for the 3D printable Liberator file to the WA AG.
It is now public record, and they should have to send it with a public records request.
Next step is to send a physical flash drive with all manner of 3D gun files to them, which also becomes a public record, and the contents have to be released on request.
Bonus points, the drive will be preserved in the state archives after a few years...
You could introduce those files as testimony for legislative hearings here in Oregon, that should get them in to Oregon's public records. If you have a 3D print file for AR magazine body please send it to me at [email protected]I have cad files of guns and parts ...like silencers, mags, suppressors etc etc
I can upload them for you guys to download from google drive you want me to upload them to google drive?............huge download Im guessing 2.5-3 gigs ....mail them a few a day hahahaha!
850 GUN MANUALS IN .PDF files .....tooo many to list it would break this thread quota,
112 3D CAD FILES
10-22_Receiver_Model.igs
10-shot-magazine-for-mauser-712.zip
1911_45_magazine.zip
1911_bushing_wrench.stl
1911_Grips_Blank_Left.igs
1911_Grips_Blank_Right.igs
1911_Slide_Model.igs
1911A1.igs
22_electric_firearm.zip
22_silencer.scad
22_single_shot_firearm.zip
22_tube_mag_loader.zip
223_Round.stl
22casing.stl
22lr.zip
22LR_Sound_Modifier_Gil.zip
375hh.stl
44magnum.stl
45_ammo_box.STL
5.7x28mm.stl
50_bmg_cartridge.zip
5-56-223-flash-hider.zip
5-56-223-muzzle-break.zip
5-56-nato.zip
9x19mm_parabellum_casing.stl
Adapter-P-.5-28-to-.75-16.SLDPRT
AK47_Blank.igs
AK47_FCG_2012_10.zip
Ambi-Selector.zip
AR10_Lower_Receiver.igs
ar-15_30_round_magazine_coupler.zip
AR15_A1_De_Handle.IGS
AR15_A2_De_Handle.IGS
AR-15_Enhanced_Trigger_Guard.zip
AR-15_Enhanced_Trigger_Guard_Holes.STL
AR-15_Flash_Suppressor_Helical_Flute.ipt
AR-15_Flash_Suppressor_Helical_Flute.stl
AR-15_Flash_Suppressor_Helical_Flute.stp
AR-15_Grip.stl
AR15_Lower_Receiver_Just_Buffer_Repaired_turomar.stl
AR15_Lower_Receiver_Just_Buffer_Repaired_turomar.zip
AR15_Lower_Receiver_Less_Buffer_Modeled_Support_Repaired_turomar.stl
AR-15_Magazine.zip
AR-15_Reinforced_Lower_Receiver.stl
AR-15_trigger_group.zip
AR-15_Trigger_Guard_Stubs.STL
AR-15_Vise_Block.STL
ar-15-a-2-flash-hider.zip
AR-15-Complete_Reference_Design_Set-Deterrence_Dispensed.zip
AR-15-DIAS.zip
ar-charging-handle.zip
Beretta92FS.igs
Butt_Stock_With_Grip_v6.SLDPRT
chamber_flag.stl
compensator-for-akm.zip
DefDist_AR15_Lower_Receiver_v5.zip
DefDist_Cuomo_AR-15_30_round_magazine_v4.4.zip
enhanced-bolt-assist-device..zip
f-1-grenade.zip
flashhider-for-vz-dot-58-rifle.zip
fn-fal-receiver.zip
front-sight-for-vz-dot-58-rifle.zip
g34-model-full-internal-parts-based-on-photo-and-explode-diagrams.zip
glock_sight_press.stl
glock_sight_press_body_handle.stl
glock_sight_press_slide.stl
glock17_magazine.zip
glock-22-stubby-suppressor.zip
glock-22-suppressor.zip
grenade.zip
Grip_Stock_v6_Front_Oriented_turomar.STL
Grip_Stock_v6_Mid_Lower_Oriented_turomar.STL
Grip_Stock_v6_Mid_Lower_Oriented_turomar.zip
Grip_Stock_v6_Mid_Upper_Oriented_turomar.STL
Grip_Stock_v6_Rear_Oriented_turomar.STL
hk-g3-slash-91-flash-hider.zip
Hole_Punch_Gun.zip
lapua_762x39.stl
lts-ar15-precision-trigger.zip
lts-ar-skeletonized-racegun-trigger.zip
lts-raptor-target-trigger.zip
lts-take-on-the-pws-diablo-muzzle-device.zip
lts-take-on-the-yhm-phantom-flash-hider.zip
lts-zeus-ar10-lower-receiver.zip
m-10-semi-auto-lower-rec.zip
mac-10-upper-rec-shell.zip
Makarov_Follower.dwg
Makarov_Follower.ipt
Makarov_Follower.stl
Napolitano_Special.zip
picatinny_maglite_lx50.STL
Picatinny_Rail.stl
rail-mounted-foregrip.zip
README.txt
receiver-for-mauser-c96-bolo.zip
ruger-10-22-magazine.zip
ruger-10-22-rifle-stock.zip
ruger-10-22-trigger-group-assy.zip
ruger-22-mkiii-magazine.zip
savage-340-scope-mount.zip
shotshell_holder_back_half.stl
shotshell_holder_front_half.stl
SIGP228.igs
silencer-for-vz-dot-58-rifle.zip
SLIDE-ASSEMBLY-XD-40-Tactical.zip
Sound_Moderator.stl
Sound_Moderator_MK2.stl
sten-mk-ii-magazine.zip
STI.igs
the-lts-thor-iv-223-lower-receiver.zip
tikka-t3-magazine-body.zip
VZ58.igs
Oregon would like to have those files
You could introduce those files as testimony for legislative hearings here in Oregon, that should get them in to Oregon's public records. If you have a 3D print file for AR magazine body please send it to me at [email protected]
Thank you.AR mag cad file sent
Extremely unlikely. But you could file a request and find out...I predict the AG's office will claim that the file is equivalent to a firearm and that you have to do a NICS transfer when they give it to you. Then they wait for you to take them to court over that issue.
Unlikely in what way? That they would win? Sure.
But what is stopping them from making this claim and forcing someone to sue over it? Is Bob Ferguson afraid of looking dumb for taking a losing strategy, or instead does he look *to the voters he cares about* like he's using every tool possible? He doesn't have to care about the cost of defending the suit, and I doubt Tina Pod is going to call him up and yell at him about how sad he's making her.