@billdeserthills Only a few will get my joke but I'm guessing there's a decent amount of Saturday night specials submerged there. After all Raven started out in the City Of Industry not all that far away.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
And no Grip Zone, either!Looks like somebody jumped the shark.
Pinky extensions are undesirable for many. Might as well have just gotten a bigger gun. As for the 43x, if I wanted a skinny 19, it's the ticket. I do not want a skinny 19.They (almost) did.
The 43X is exactly "taller" by the thickness of the magazine baseplate compared to the 43 with the pinky (or a +1) extension…. same OAL, same thickness.
View attachment 1015264
Pinky extensions are undesirable for many. Might as well have just gotten a bigger gun. As for the 43x, if I wanted a skinny 19, it's the ticket. I do not want a skinny 19.
Yes. You're right. I made an oopsThat'd be the G48 you're thinking about.
That's why mama always said to never leave the house without wearing a clean pair of underwear!Yes. You're right. I made an oops
There may be a method to my madness as to why I wear black underwear and it's not to pay homage to Johnny Cash. TMI?That's why mama always said to never leave the house without wearing a clean pair of underwear!
Hey, if you do "it" right, you can make the insides of your shorts look like the hood of the Trans Am used by Burt Reynolds in Smokey & The Bandit!There may be a method to my madness as to why I wear black underwear and it's not to pay homage to Johnny Cash. TMI?
Gonna need to find the right batch of gas station chili for that.Hey, if you do "it" right, you can make the insides of your shorts look like the hood of the Trans Am used by Burt Reynolds in Smokey & The Bandit!
Just sayin'
Most hot case deep fried bbq burritos served at stop-n-robs around Oregon will have you doing the Tijuana Two Step in 15 minutes or less.Gonna need to find the right batch of gas station chili for that.
That's probably 'cuz .40 is likely too hard on the metallurgy in the micro-class…..Hey Kimber - I did not "ask" for another striker fired "micro gat" - especially not one with an optic sticking up from the slide.
I asked for a DA/SA "micro" with 10+ capacity in 9mm & .40
SIG promised a 365 in .40, but then backed out of it when they dropped all .40 handguns.
Or to hard on the pansy hands and flinchiladas.That's probably 'cuz .40 is likely too hard on the metallurgy in the micro-class…..
Possibly. Personally speaking, I smack all my fingers with a rubber mallet on a daily basis to keep them toughened up.Or to hard on the pansy hands and flinchiladas.
It's because the Le market has dropped .40 and gone back to 9mm. SIG dropped .40 across the board, not just in microsThat's probably 'cuz .40 is likely too hard on the metallurgy in the micro-class…..
Yup because the limp wristers whined to much about the muzzle jump and getting back on target. My #1 go-2 is a P229 in 40.It's because the Le market has dropped .40 and gone back to 9mm. SIG dropped .40 across the board, not just in micros
Which I never understood as the .40 SIGs I have and shoot have only slightly more recoil than a 9mm in the same make/model gun, and that is with LE ammo.Yup because the limp wristers whined to much about the muzzle jump and getting back on target. My #1 go-2 is a P229 in 40.
You know that's really just to give yourself a "stranger ".Possibly. Personally speaking, I smack all my fingers with a rubber mallet on a daily basis to keep them toughened up.