- Messages
- 2,962
- Reactions
- 5,584
I have buffalo Bore loads for our .357s from their standard .38 load, to 158 gn cast lead semi wad cutters and these new 125 grn, JHP .357 Mag at 1700 FPS out of m y 5" S&W 686
fired one outside this evening
Buffalo Bore must use a low flash powder, since my son and I did not detect a significant muzzle flash in the dark
my son was on the deck and I was at the gate firing into the berm at 35', did not ruin our night vision, could have done a follow up shot without a loss of focus
both of us were wearing ear pro (had to say that)
but if you need a self defense load for use in the dark that uses low flash powder, I can highly recommend Buffalo Bore in 9mm, .38/357, .357 Sig and .45
yes, they are $2/rnd, but what is your life worth?
fired one outside this evening
Buffalo Bore must use a low flash powder, since my son and I did not detect a significant muzzle flash in the dark
my son was on the deck and I was at the gate firing into the berm at 35', did not ruin our night vision, could have done a follow up shot without a loss of focus
both of us were wearing ear pro (had to say that)
but if you need a self defense load for use in the dark that uses low flash powder, I can highly recommend Buffalo Bore in 9mm, .38/357, .357 Sig and .45
yes, they are $2/rnd, but what is your life worth?