Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Put the closed end of the spring on the guide rod, its supposed to fit a bit tight. If your frame is stainless you can buff out the idiot mark with scotchbrite and then 0000 steel wool. The Ronins are nice 1911s.It felt like the SPRING, wanted to bind up on the way into the end of that short guide rod. And piss me of, I "Idiot marked" it.
So a 1911 in 380 would be a Prius ?a friend of mine says that people that buy 1911;s in 9mm are kinda like people that want a fast car but settle for a Ford! lol
Accuracy...not really sure. It would appear that I forgot how to shoot hand gun. Have shot nothing but rifles at distance at the range for too long. And some practice at 7 yards or so with the carry gun shooting for center mass. I lost that muscle memory I guess.30'-40' at steel was difficult. I should do some dry firing around the house.How is the accuracy? Assuming its as good as you expect or even if its not, I VERY much doubt the FLGR would make a difference you could see. If its suffering from feeding problems? Then one "might" help but, even that is not likely the fix. So unless you want to swap top ends on it at times probably no real up side to a FLGR. Of the 2 1911's I still have one has this set up. The only reason I liked it when I got it was at the time I had a conversion to use a carbine upper on a 1911 frame. So when I shot that I of course always took along the one I could just take off the upper in one piece. Since I no longer have the conversion I think about buying the parts to change that one every time I have to clean it. Far easier to clean one that does not have that thing in.
As for the "idiot scratch" I used to long ago take GREAT pains to not do this. I finally stopped bothering to try real hard. Of course both of mine now are stainless so it shows far less and if I ever wanted to fix it, far easier to do so. On pistols with any kind of dark finish it does stand out. If I ever buy another one that is like that and scratch it? Will just let it go as not really into them staying pretty anyway. One nice thing about both of mine being decades old with lots of carry time. Don't need to worry about little stuff
LOL Wifey commented when I got my Kimber 1911, 45acp those years ago how much she liked the feel of it. And she enjoyed shooting it some. The recoil was more than she liked though. The 9mm is easier to rack, and softer shooting. I'm a recoil puss too, though .45 is no issue for me.a friend of mine says that people that buy 1911;s in 9mm are kinda like people that want a fast car but settle for a Ford! lol
That is why a 9mm 1911 is a great thing!Once you get peripheral neuropathy in your hands, the 9mm is a kinder, gentler gun than the .45 ACP and 10mm. And safer.
Probably not considering the excellent input here. Though I didn't find out if there was a reasonably price rod that just drops in.So @Mikej curious if your gonna keep the original or buy a FLGR?
Wilson makes a FLGR you can get for about $40 or so online. Jim Clark says stay away from guiderods, that's good enough for me.Accuracy...not really sure. It would appear that I forgot how to shoot hand gun. Have shot nothing but rifles at distance at the range for too long. And some practice at 7 yards or so with the carry gun shooting for center mass. I lost that muscle memory I guess.30'-40' at steel was difficult. I should do some dry firing around the house.
No feeding problems what so ever. I only shot my re-loads in it.
i guess having only ONE 1911 I figured a full length guide rod was how they're supposed to be. and the makers put the shorty in there to save money. Because of that it figures the FLGR has to be better, right? Not so from what I'm reading.
LOL Wifey commented when I got my Kimber 1911, 45acp those years ago how much she liked the feel of it. And she enjoyed shooting it some. The recoil was more than she liked though. The 9mm is easier to rack, and softer shooting. I'm a recoil puss too, though .45 is no issue for me.
That is why a 9mm 1911 is a great thing!
Probably not considering the excellent input here. Though I didn't find out if there was a reasonably price rod that just drops in.
Fun story, Yup... been there myself perhaps my first lesson in shooting guns about 27yrs ago bought a new Colt Commander and without even learning to shoot it bought a Korns recoil "reduction" system to be tacticool.
Sounds great so far then. Being 9mm far cheaper to play with if you don't want to roll. Get some cheap ball ammo and the practice will be fun while you get back on track. With a defensive use hand gun 40' is not something many can do well so I would not be disappointed since sounds like its been a while. Play at 20 ft for a while and then move back. It will soon be easier. Sounds like a great little pistol!Accuracy...not really sure. It would appear that I forgot how to shoot hand gun. Have shot nothing but rifles at distance at the range for too long. And some practice at 7 yards or so with the carry gun shooting for center mass. I lost that muscle memory I guess.30'-40' at steel was difficult. I should do some dry firing around the house.
No feeding problems what so ever. I only shot my re-loads in it.
i guess having only ONE 1911 I figured a full length guide rod was how they're supposed to be. and the makers put the shorty in there to save money. Because of that it figures the FLGR has to be better, right? Not so from what I'm reading.
LOL Wifey commented when I got my Kimber 1911, 45acp those years ago how much she liked the feel of it. And she enjoyed shooting it some. The recoil was more than she liked though. The 9mm is easier to rack, and softer shooting. I'm a recoil puss too, though .45 is no issue for me.
That is why a 9mm 1911 is a great thing!
Probably not considering the excellent input here. Though I didn't find out if there was a reasonably price rod that just drops in.
Saint JMB didn't feel the need to have one, so it's unnecessary.i guess having only ONE 1911 I figured a full length guide rod was how they're supposed to be. and the makers put the shorty in there to save money. Because of that it figures the FLGR has to be better, right? Not so from what I'm reading.
Are the same guide rods used in both 9mm and .45acp 1911s? Needs to come with a bushing too.Wilson makes a FLGR you can get for about $40 or so online. Jim Clark says stay away from guiderods, that's good enough for me.
Well damn man! Say no more! Seriously.Saint JMB didn't need feel the need to have one, so it's unnecessary.