- Thread Starter
- #61
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Those are 9mm ejectors.All of my Glocks are Gen 3, and the only thing I do to all of them is replace the ejector (part number 336 for G19/17) with the ejector from the Gen 4 (part number 30274 for G19/17). This modification cures any brass-to-the-face problems that can sometimes occur with the Gen 3 Glocks.
I also usually chop the "nub" off of the slide release since my natural grip sometimes rides the extension while shooting (long fingers), but that's just a modification specific to me.
Besides that I leave everything factory.
Enjoy your new Glock!
G35 is a comp gun and that one has some rounds through it.Stripped the 35 down for a going over before taking it up to Lucky's. Lots of wear but, over all looks in good shape. Rifling is still good but, the finish as you can see is pretty worn. Keep barrel and powder coat or, new KKM stainless? I'm leaning toward the stainless but, decisions decisions.
View attachment 739079 View attachment 739080 View attachment 739081 View attachment 739082
Definitely a former comp gun.The bottom of the grip is in pretty rough shape also. Should I magwell it or maybe have it trimmed up to look clean? Or, just leave it?
View attachment 739085
Yes...............it's .40 Caliber. That's why it was only $450. All my Glocks are chambered for 9MM. So when the SHTF and you run out of ammo, I'll just toss you one of my 9MM's instead.Doing a little looking around I guess I should say, I'm going to do a semi-custom job to the 35!
Cerakote slide and mag bottoms to match
Barrel upgrade
Tungsten guide rod
Possible trigger
Different night sights (I'm not to particular on the current ones)
Different Mag release (Has an extended one on it but, don't care much for it either)
Anything I'm missing?
Thanks but, my EDC is a G48. I've had a number of Glocks over the years.So when the SHTF and you run out of ammo, I'll just toss you one of my 9MM's instead.
I saw that in the pics.
I thought that you had mentioned that. I'm a fan of calibers that I can control. I'm too old to change now. Did your pistol come with the laser?Thanks but, my EDC is a G48. I've had a number of Glocks over the years.
40 is popular with gamers because it makes power factor easily.Yes...............it's .40 Caliber. That's why it was only $450. All my Glocks are chambered for 9MM. So when the SHTF and you run out of ammo, I'll just toss you one of my 9MM's instead.
No laser. It is a Chinese Surefire clone and did come with the gun. I took it off and through it in the junk bin for now. Not sure I'm going to use a light on this as, I am planning a good set of night sights. The ones on it are dead.Did your pistol come with the laser?
The mail just delivered my fiber optic sites that I'll be putting on my G26.No laser. It is a Chinese Surefire clone and did come with the gun. I took it off and through it in the junk bin for now. Not sure I'm going to use a light on this as, I am planning a good set of night sights. The ones on it are dead.
I will do that. We're going to a rehearsal dinner sometime today (my oldest granddaughter is getting married tomorrow) and Ma' doesn't want me to go out to my shop!Post a pic here and let me know how you like them.
Those are 9mm ejectors.
OP has a 40, so different can o' worms.
BTW best Glock 9mm ejrctor is 47021.
Buy TMH 47208 to get that ejector.
This is the Gen5 ejector.
30274 is the Gen4 ejector.
And they have improved on that.