So Underwood Ammo, maybe you've heard of them? Can't duplicate ANY .45 ACP round that even comes close to the 10mm in terms of energy delivered. Nor can they get to 1425 near as I can tell. You should email them your load specs.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That makes no sense.......what is that conversion kit for a 1911 (a Nowlan?) converts the gun to shoot a round that has a bit longer case with a much heavier load? They seem to be well accepted and commonly used. The frame on my IWI 45 Win Mag was not heavier built, just had a longer mag well to accommodate the magnum length case.
.460 Rowland. He claims the longer case isn't necessary, just prevents being chambered in any weak .45's. He has conversion kits for the XD series, Glocks, and a 1911 kit recommended for only quality steel framed guns. He claims to push a 185gr at 1575 fpsThat makes no sense.......what is that conversion kit for a 1911 (a Nowlan?) converts the gun to shoot a round that has a bit longer case with a much heavier load? They seem to be well accepted and commonly used. The frame on my IWI 45 Win Mag was not heavier built, just had a longer mag well to accommodate the magnum length case.
.460 Rowland. He claims the longer case isn't necessary, just prevents being chambered in any weak .45's. He has conversion kits for the XD series, Glocks, and a 1911 kit recommended for only quality steel framed guns. He claims to push a 185gr at 1575 fps
.460 Rowland® – Shoots Like a Dream.. Hits Like a Sledgehammer!
The heavy 45ACP loads were originally developed for heavy revolvers that were in common use at the time. My first handgun was a Colt M1917 45ACP that had been heavily refined. I still have a M1955 S&W that I bought new in 1976.
You're right, it's not .45 ACP. However, it is loaded with the same bullets to the same COAL as .45 ACP. Meaning both cartriges have the same usable case capacity. So in theory, a person could duplicate these loads using .45 ACP.Exactly. But is it a .45 ACP? Nope.
You're right, it's not .45 ACP. However, it is loaded with the same bullets to the same COAL as .45 ACP. Meaning both cartriges have the same usable case capacity. So in theory, a person could duplicate these loads using .45 ACP.
You're right, it's not .45 ACP. However, it is loaded with the same bullets to the same COAL as .45 ACP. Meaning both cartriges have the same usable case capacity. So in theory, a person could duplicate these loads using .45 ACP.
NONSENSE! The .40 Strong and Warlike needs to be the next US military issue pistol cartridge. It would clear the field and take all the cakes!10mm FTW. 40 Short and Wimpy needs to go away.
NONSENSE! The .40 Strong and Warlike needs to be the next US military issue pistol cartridge. It would clear the field and take all the cakes!
With heavier recoil springs and a compensator that helps vent pressure to keep the gun from falling apart.
Sounds stupid +P to me. If you need a bigger gun, buy one.
No, this won't happen. The shooting community (I guess I'm including the military, the FBI, police) have finally come to the realization that all handguns suck. If one needs a bad guy down, right now, then one needs a rifle and a well-aimed shot. Or a shotgun, but talking about other awesome things that are going down quickly!But come the next Miami shooting type event, They will rediscover larger better calibers all over again!
No, this won't happen. The shooting community (I guess I'm including the military, the FBI, police) have finally come to the realization that all handguns suck. If one needs a bad guy down, right now, then one needs a rifle and a well-aimed shot. Or a shotgun, but talking about other awesome things that are going down quickly!
There may be some new hotness, but the move to 9mm is because you get more bullets and you need a rifle to actually get something done. NO PISTOL will be good enough. Not 10mm, not 357sig, not 45acp, not 460Rowland. 5.56 and UP!
185gr projectile at 1350 fps (or even higher) sounds very interesting. I would highly appreciate if you could share your loading data. I can perform safe experiments on them. Thanks!
185gr projectile at 1350 fps (or even higher) sounds very interesting. I would highly appreciate if you could share your loading data. I can perform safe experiments on them. Thanks!
I'm just curious how such speed can be achieved with the 45ACP.Look into the higher end 180-grain 10mm Auto loads. (It has been done numerous times).
I'm just curious how such speed can be achieved with the 45ACP.