Engraving in Washington State A+++++++

Messages
14
Reactions
11
Just had my lowers engraved and am blown away at the quality of the work and first class customer service. Here is an example of where I had mine engraved: 14706825_1608497106119256_327760635118872260_o.jpg
I know most of you probably know of Trevor and his mad engraving skills but just wanted to chime in and say Trevor offers first class customer service "while you wait" or you can drop off and pick up your item later. I just had 3 short barrel AR lowers engraved with my trust name and city/state on the inside lip of the magazine well. The engraving is first rate and Trevor blackened the letters right after engraving. Three lowers were engraved in about 15-20 minutes with another 10 minutes to re-blacken the letters (optional).

With all of the Washington State June 9 F1 approvals rolling in I thought some might be looking for an engraver. Look no further than Trevor if you are in Western Washington. His contact info is:

Trevor K
Hyperion Precision LLC
6613 S 192nd Place
Suite K-106
Kent, WA 98032
Tel. 253-470-8197
Email: contact@hyperionprecision.com
www.facebook.com/hyperionprecision
 

Joe13

Messages
13,472
Reactions
40,901
Very nice:cool:

For those down in the PDX area, Jon @NWCustomFirearms is the one that engraved all of the NWFA Lowers and they turned out really nice as well.

(Figured it wasn't too much of a thread crap since we are so far away)

IMG_1345.JPG
 
Last edited:

Mark W.

Messages
7,845
Reactions
10,867
Interesting I need some knobs for my Willys Jeep project engraved I think I'm going to talk to these guys looks just like something they could do.
 

bassman2

Messages
258
Reactions
128
If you're in the PDX area you'll want to take all of your engraving to BYE Engraving. I took lowers to BYE and to an FFL that does engraving. BYE did the work while I waited and it was clearly superior.

The FFL's engraving looked poor by comparison - AND it cost 2x as much as BYE. I didn't complain, but I should have.
 

Joe13

Messages
13,472
Reactions
40,901
If you're in the PDX area you'll want to take all of your engraving to BYE Engraving. I took lowers to BYE and to an FFL that does engraving. BYE did the work while I waited and it was clearly superior.

The FFL's engraving looked poor by comparison - AND it cost 2x as much as BYE. I didn't complain, but I should have.
Which FFL did you use and can you post pictures please.
 

UPCOMING EVENTS

Albany Rifle & Pistol Club (ARPC) Gun Show 2021 show is cancelled
Linn County Expo Center
3700 Knox Butte Rd E, Albany, OR 97322, USA
22 Rimfire Challenge
Redmond Rod and Gun Club
Redmond, OR 97756, USA
Rimfire Challenge May 8th @ DRRC
Douglas Ridge Rifle Club
27787 OR-224, Eagle Creek, OR 97022, USA

LATEST RESOURCE REVIEWS

  • A Cut Above Pawn
    5.00 star(s)
    Fantastic Customer Service!
    Recently, they helped my lady transfer a pistol to a family member in CA. Most FFLs would have told us to pound sand when we mentioned where we...
  • HighLine Firearms
    5.00 star(s)
    One of the best!
    I have bought from online and in person. Great store, he had things I did not know were needed. I try and recommend Highline Firearms to people I...
  • Copeland Custom Gunworks
    5.00 star(s)
    The only gunsmith I'll use
    Tim has done a few projects for me and the result is always the same. Amazing. End of story. From complete refinish to custom machining, Tim is...
  • Copeland Custom Gunworks
    5.00 star(s)
    great work refinishing my 27 year old 1991 a1 compact colt .45
    Tim did a great job making my gun look brand new again and replacing the old parts inside. Super Happy!!
  • Lucky Sporting Goods
    5.00 star(s)
    Just a transfer but a great one. A+
    Came here today to meet another forum member to buy a Glock. Was the best transfer I've had the pleasure of doing. Even though I was just there...
Top Bottom