AK knowledge and help

[Savage Jav]

Damn, now I have to justify getting the stock

 

[wired]

PXL_20210914_195129497.jpg

• wired
• Sep 14, 2021

PXL_20210914_195233437.jpg

• wired
• Sep 14, 2021

 

[AK0perator47]

PXL_20210914_195129497.jpg

• wired
• Sep 14, 2021

PXL_20210914_195233437.jpg

• wired
• Sep 14, 2021

I tried doing the wire stocks but I don't like them. They look good and all it's when you use it.

 

[wired]

I tried doing the wire stocks but I don't like them. They look good and all it's when you use it.

The VZ stocks are significantly better than the AMD stocks in that regard. Neither bother me though.

 

[Knobgoblin]

Scored another 5.45 bake today.
Has the flat, us marked steel floorplate.
I understand that to be a compliance part, compliments of Arsenal usa?

 

[wired]

Did a little stock install fun today

 

[Daytona14]

How could I attach a red dot or holo sight on my WASR? Looking for something a little budget friendly. Thanks

 

[rjmt]

How could I attach a red dot or holo sight on my WASR? Looking for something a little budget friendly. Thanks

this what I use - works great

Dog Leg Rail, Gen-3 - AKM, AK-47 / 74

www.texasweaponsystems.com

 

[Savage Jav]

How could I attach a red dot or holo sight on my WASR? Looking for something a little budget friendly. Thanks

This, High quality product that wont break the bank. Id say rs regulate side mount is the way to go but for the money this is the best.

Home :: Attero Arms

www.atteroarms.com

 

[DirectDrive]

How could I attach a red dot or holo sight on my WASR? Looking for something a little budget friendly. Thanks

Do you have a side mount like this on your receiver ?

 

[nobamaplease]

Attero Arms, I like the Bravo mount

Bravo Mount - Attero Arms

The Bravo Mount was designed to work with the Aimpoint T1/H1. It features a built in non-adjustable rear sight notch that will provide a 1/3 lower co-witness. The rear sight is machined to “P” or 300m on most AK variants. The Bravo Mount will work with: Aimpoint: T1, H1, T2, H2 Holosun: 403G...

www.atteroarms.com

And he's right in Portland

 

[Daytona14]

Do you have a side mount like this on your receiver ?
View attachment 1185861

Yes it does

 

[Savage Jav]

Attero Arms, I like the Bravo mount

Bravo Mount - Attero Arms

The Bravo Mount was designed to work with the Aimpoint T1/H1. It features a built in non-adjustable rear sight notch that will provide a 1/3 lower co-witness. The rear sight is machined to “P” or 300m on most AK variants. The Bravo Mount will work with: Aimpoint: T1, H1, T2, H2 Holosun: 403G...

www.atteroarms.com

And he's right in Portland

this

 

[DirectDrive]

Yes it does

OK, then you have a lot of options open to you.
Go over on Midwest Industries website and if they have something you like.
RS Regulate as mentioned above is another one.

 

[RedneckRampage]

How could I attach a red dot or holo sight on my WASR? Looking for something a little budget friendly. Thanks

I prefer the Ultimak.

 

[titsonritz]

I prefer the Ultimak.

View attachment 1185915

I do too, but only with a Micro.

 

[wired]

The Russian PK-A Venezuela sights are pretty good red dots and are side mount compatible. They are rock solid.. Say nyet to non combloc optics on AK's.

 

[nobamaplease]

All these different optic mounting options for the AK will put the optics at different distance from the eyes, some red dot/holo optics you might not want too close to your face, like the side mounts. Some red dot/holo optics are designed to be a little farther away from face.

 

[AshWilliams]

I run the Ultimak on both my AKMs.

 

[Mikej]

OK, then you have a lot of options open to you.
Go over on Midwest Industries website and if they have something you like.
RS Regulate as mentioned above is another one.

These are what I used on my AK. Highly adjustable depending on what parts you get. I used them to mount a 1949ish vintage Lyman Alaskan.