I love my sig cross but as a taller guy, the length of pull is still about an inch or two short. This is true even with the adjustable stock fully extended. I am wondering if anyone knows of an extension block or know of a gunsmith that would be interested in taking on this project. My thought is it could be added to the receiver side of the hinge (left pic). A design consideration would be that if you extend the length, the bolt handle might hit one the comb posts when folded. But I think there is enough of a gap to thread the bolt handle between the two posts (right pic). I don't think it would be very complicated. No moving parts. Just a slot cut on the top, two faces that match the current layout, and longer replacement screw.
This extension might fix another gripe I have about this rifle in that you can't remove the bolt without half folding the stock. There is a slot cut into the receiver and top of the stock that the bolt rides along, it isn't long enough currently for the bolt to fully clear the receiver to remove it. This extension block might give it sufficient clearance.
I know this isn't something that everyone that owns this gun wants, but I feel that there is probably enough people out there with a similar desire that it might be even worth doing a short run of these. Any advice would be helpful.
Thanks,
This extension might fix another gripe I have about this rifle in that you can't remove the bolt without half folding the stock. There is a slot cut into the receiver and top of the stock that the bolt rides along, it isn't long enough currently for the bolt to fully clear the receiver to remove it. This extension block might give it sufficient clearance.
I know this isn't something that everyone that owns this gun wants, but I feel that there is probably enough people out there with a similar desire that it might be even worth doing a short run of these. Any advice would be helpful.
Thanks,
Last Edited: