Separating stainless chips from cleaning brass - FAST

Got tied shaking a Franklin tumbler tub over a 5 gallon bucket. I run two tumblers at a time and it just gets old and killing my back. Looked for a better way.

Soybean shaker table. Yup food processing gear, its stainless and ment to work hard. Found this China made one on eBay, typical doz or so different sellers all selling the same thing. Prices range from $400 used to $480 new shipped.


Arrived quickly and set it up out on the ranch next to the barn outside. Its about 36” long and 14” wide, so not too big to store and easy to pick up about 30lbs. Set up quick and ran the first round of brass though it. I am still playing with what the best set up is. I am going to add some water sprayers drawing from a pump in the media recovery bin, this way it recycles the same water. I ran the brass though 2 times takes not very long and so far is working great. Also going to add some magnets to the dump shoot for the brass, to catch any stray stainless chips that work down the sides.

The gate off the hopper is adjusted to knock the brass over so they vibrate down the table on their sides, dumping any stainless media. I do not use pins, only stainless chips form Ammo Brass in FL. The chips work flawless in this set up.


54EF9F9A-F468-4701-BD1E-3C3E968C6FFE.jpeg 25F0276E-5291-4605-936E-4E2105F4C4F5.jpeg
 
Last edited:

UPCOMING EVENTS

Cerberus Training Group - Skill Builder - Pistol/Rifle Combo
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Albany Rifle & Pistol Club (ARPC) Gun Show
Linn County Expo Center
3700 Knox Butte Rd E, Albany, OR 97322, USA
Arms Collectors of SW Washington Gun Show
Battleground Community Center
912 E Main St, Battle Ground, WA 98604, USA
DRRC .22 Rimfire Challenge Oct 10
Douglas Ridge Rifle Club
27787 OR-224, Eagle Creek, OR 97022, USA
Oregon State Steel Challenge Championship
Central Oregon Shooting Sports Association
Millican, OR 97701, USA

LATEST RESOURCE REVIEWS

  • J&B Firearm Sales
    5.00 star(s)
    Good local shop
    Picked up a rifle yesterday from J&B. This was the second or third gun purchase over the last few years from them. I always enjoy stopping by...
  • H&K Gun Shop
    5.00 star(s)
    The only place I have found 9mm in stock
    I’ll admit I didn’t even know this place existed, as I don’t tend to go into Forest Grove often. But it’s a giant (looks bigger from the...
  • Revelation Arms
    4.00 star(s)
    Depends who answers the phone
    I was given the number to Roger Loock by Beaver Creek Armory, as I needed parts I had ordered from MCarbo installed on a Kel-Tec Sub2000. On my...
  • Coastal Farm & Ranch - Cornelius
    3.00 star(s)
    Lesson learned
    I’ll take some responsibility here, as I took the employee at their word instead of doing a thorough inspection. Short story is that I asked for a...
  • MK Tactical
    5.00 star(s)
    Good guys!
    I stop in here every once in a while to see what Michael has in the clearance section, and to ask questions when I have a project in mind...
Top Bottom