Member 53328
- Messages
- 9,059
- Reactions
- 19,929
Geissele normally has a pretty good Black Friday sale as well.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I shoot bass mostly except 7.62x39. No trigger on my AR based rifle would work 100%. Even the POF 4.5lb until I went back to milspec PSA EPT trigger.I bought a couple of CMC triggers a month or two back, I need 4.5 pounds, I have 3.5 and lower, but they don't work at the range I frequent for rifles. $140 I think.
A couple of places make a High Reliability spring that you can put in a higher end trigger. It will up the pull weight a bit but you still have the much smoother, cleaner break.I shoot bass mostly except 7.62x39. No trigger on my AR based rifle would work 100%. Even the POF 4.5lb until I went back to milspec PSA EPT trigger.
I mentioned it before but outside of that I believe the POF 4.5lb trigger was fine with steel cased 5.56. I only have one other AR that I shoot steel with. 14.5" chrome lined Brownells barrel seems to love it. Ejects cases between 3-4 o'clock and no less accurate up to 100 yards.
yeabut my orange mocha frappuccino.....Why complain about people spending $240 on a trigger.
There are probably people on this forum that spend what I could consider "stupid money" on all kinds of things, makes no difference to me. But for example, if someone is used to buying $5 worth of coffee or junk food everyday, they could forego that for 50 days and have $250 for a trigger.
Your mocha means nothing once we start talking about optics.yeabut my orange mocha frappuccino.....
yeabut my orange mocha frappuccino.....
I've always found knowing multiple word coffee names an effeminate practice, but that's just me, a guy who doesn't drink coffee.Your mocha means nothing once we start talking about optics.
I did play with JE springs on a PSA EPT trigger. For under $50 you get a very light trigger. I did get some light primer strikes with that setup. Maybe a heavier buffer would have made a difference. I didn't think to try at the time.A couple of places make a High Reliability spring that you can put in a higher end trigger. It will up the pull weight a bit but you still have the much smoother, cleaner break.
I heard the other day that a "normal" daily trip to Starbucks everyday over one's lifetime is/would be $50,000.Why complain about people spending $240 on a trigger.
There are probably people on this forum that spend what I could consider "stupid money" on all kinds of things, makes no difference to me. But for example, if someone is used to buying $5 worth of coffee or junk food everyday, they could forego that for 50 days and have $250 for a trigger.
I don't think buffer weight is going to help much with light primer strikes unless you're out of battery. My understanding is that the berdan primers in steel cased ammo are harder, and require stronger impact than the boxer type used in most commercial, brass cased ammo.I did play with JE springs on a PSA EPT trigger. For under $50 you get a very light trigger. I did get some light primer strikes with that setup. Maybe a heavier buffer would have made a difference. I didn't think to try at the time.
Several people have responded the same. Initially it seemed to help. I could just about get thru a magazine without a light strike but not enough to be considered reliable so I went back to a full power trigger. Maybe the buffer didn't help but it's working 100% now.I don't think buffer weight is going to help much with light primer strikes unless you're out of battery. My understanding is that the berdan primers in steel cased ammo are harder, and require stronger impact than the boxer type used in most commercial, brass cased ammo.
There is a reason the standard GI hammer has a lot of mass and a fairly heavy spring. Even when I replace them with an ACT I use the heavier of the two springs provided. The Giessele triggers are also designed for military applications which is a reason I;ve used them as well. All or my AR's have a primary or secondary purpose for self defense so making sire they go bang every time I pull the trigger is my highest priority,I don't think buffer weight is going to help much with light primer strikes unless you're out of battery. My understanding is that the berdan primers in steel cased ammo are harder, and require stronger impact than the boxer type used in most commercial, brass cased ammo.
Sounds like solid logic to me.There is a reason the standard GI hammer has a lot of mass and a fairly heavy spring. Even when I replace them with an ACT I use the heavier of the two springs provided. The Giessele triggers are also designed for military applications which is a reason I;ve used them as well. All or my AR's have a primary or secondary purpose for self defense so making sire they go bang every time I pull the trigger is my highest priority,
I may have paid $115 or $140 I honestly don't recall and whatever it is too late now.These were on sale for $115 two weeks ago.
They are 4.5 lbs
That's a whole other animal altogether, and yeah, it can get really expensive really fast.Your mocha means nothing once we start talking about optics.
One of my optics costs more than my next most expensive setup, optic and rifle, combined by several hundred. Let me tell you how long it took me to actually "pull the trigger" and buy it. And also let me tell you I took the day off work to make damn sure it was delivered directly into my hands. Probably a one time deal for me.That's a whole other animal altogether, and yeah, it can get really expensive really fast.
I know all too well.One of my optics costs more than my next most expensive setup, optic and rifle, combined by several hundred. Let me tell you how long it took me to actually "pull the trigger" and buy it. And also let me tell you I took the day off work to make damn sure it was delivered directly into my hands. Probably a one time deal for me.