- Messages
- 31
- Reactions
- 12
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
are you wanting only Lee?
I've got a lee bullet seater die that I don't use if that helps.
You can use any brand of dies with your press. My personal preferences are Redding and RCBS but a lot of people swear by Lee.Actually anything that will work with my Lee press. I don't know if other brands are interchangable?
And some people swear at Lee! But Norwester is right, all standard dies are 7/8" threaded, if I recall correctly. And I use Lee Carbide dies for .45 ACP, and they work fine. My personal preference is Dillon for the RL-550B, but I also like RCBS and also use Hornady, and have used Redding in the past. They all have worked fine, in my experience. And you certainly can "mix and match", as I use Lee factory crimp dies after I use the RCBS sizing die and the Hornady seating die for .223 ammo loaded for the AR-15.You can use any brand of dies with your press. My personal preferences are Redding and RCBS but a lot of people swear by Lee.