Post your ARs (Expected to be Pic heavy)

[Gator Monroe]

 

[Tomahawk67]

What lengths? Are they pin or weld on?

The 1/2-28 threaded is 5.5" long and the 5/8-24 threaded is 4.5" long. they are steel and not drilled for pinning , but that is easily accomplished.

 

[Kruel J]

The 1/2-28 threaded is 5.5" long and the 5/8-24 threaded is 4.5" long. they are steel and not drilled for pinning , but that is easily accomplished.

I'd be interested in the 5.5 1/2-28. Shoot me a Convo.

 

[shibbershabber]

Ill play...

Some of these are gone... looking back, wish Id kept them all

 

[Mygrainman]

Scarlett got a new outfit... lost a little weight in the process too.
New 7" BCM handguard, new Seekins mag release and bolt catch, and swapped pistol braces. The black dye was starting to wear out causing the originally pink sig brace to look purplish... So I'm trying out the Shockwave instead... It's lighter, and the KAK tube allows it to collapses to a shorter OAL... but it's not as comfy when it accidentally hits my shoulder. She sure looks Purdy though!

Here she is in travel mode... The "blast can" can be reversed and recessed into the handguard, and the shockwave fully collapsed to take's a good 6" inches off so it fits in my back pack...

Then when I'm ready to shoot The knurling makes it easy to turn the can around and get it good and snug, then I just extend the brace and she's good to go!
I bought one of Magpul's 300bo mags to try out too... not sure how much difference it will make though.

Of corse when the supressor gets out of jail she'll be wearing an ASR device instead of the blast can.

 

[11Charlie]

The AR and the flag in the back ground say it all!!

 

[token3495]

 

[xrangerx]

 

[Andyh23]

Mini-Recce

• Andyh23
• Mar 21, 2018

Mini-Recce 2

• Andyh23
• Mar 21, 2018

 

[Mygrainman]

I've spent months planning, researching and resourcing for a build... but this one just fell together like it was meant to be. Im thinking it might be my best creation yet!
I got a killer deal on an Aero build kit with a sweet battleworn titanium Cerakote from a member here , and it begged me to turn it into a 10.5" 300 blackout pistol with a recessed KX3 flaming pig... my supressor will fit inside too Just waiting on my stamp... ATF
There's a few hogs in Texas that only have a few months left on the hoof...



Aero upper, lower, and hg titanium battleworn Cerakote
BCM/Vltor Mod3 Charge handle
Noveske KX3 flaming pig
Faxon 10.5" 300 BO barrel
Rainier Match low pro gas block
P.O.F. Drop in trigger
KNS Anti walk pins
Shockwave Brace w/KAK tube
Strike enhanced LPK
Seekins ambi safety
Magpul QD endplate
Magpul AFG gen1
Ergo grip
Fab Defense BUIS
Vortex Strike Eagle 1-6
Burris PEPR QD mount

 

[Mygrainman]

OK... last one for a while. Got the complete PSA upper with BCG and Magpul MBUS for $250. Found a $70 Sportsman's GC and a $10 off coupon and used it to buy a LPK and a MOE grip... and I had one Aero lower left from when I bought a few for $50 each a while back. Only thing I had to buy was a buffer tube assembly.
I also had a STR and a Slimline Forefrip in the parts bin to spice up its magpul flavor.

I really like the SL handguard for some reason.

 

[Kruel J]

Just got done with some upgrades to her:

Fail Zero Melonite/NiB BCG
Shilen 16" Match grade barrel
BE Meyers 249 Saker flash hider
LaRue Tactical SPR 1.5 mount
Leupold Mark AR Firedot scope
VTac light mount
Fenix TK20R 1000 Lumen light

 

[Diamondback]

Latest update with optic and D60 drum.

 

[Gator Monroe]

22 Dedicated M16A2 NM​

 

[Tomahawk67]

 

[FORESTDUMP]

Had fun looking through this thread

 

[Gator Monroe]

Retro AR15/M16 BUILD in 22LR (SP1/604) with Custom Dedicated 22LR pencil Profile Barrel .

 

[Ahol]

From top to bottom
6.8 spcII pistol 12.5" ARP mid length gas with just random parts laying around on an Aero lower

6.8 spcII 16" ARP fluted barrel on an Aero Freedom lower. This is my deer hunting rifle. I made it a light weight for the most part. it weighs 6 lbs 14oz with optics. It can shoot sub moa all day, more accurate than I am for sure.

.223 Wylde with a cheap barrel for now until I decide what I want to get. Spikes Tactical crusader lower. It has a Primary Arms red dot and a 3x magnifier.

All 3 I built piece by piece. So I was able to get exactly what I wanted on them. It's amazing it started with the 6.8 for hunting, and next thing you know they have multiplied to 3 complete AR's with 2 more waiting to be built into who knows at the moment.

I have 2 more lowers in the safe I don't know what I want to do with yet. One of them will be turned into an SBR someday.

 

[SIG34]

 

[SIG34]