- Messages
- 11
- Reactions
- 0
Thanks so my locks work now so if the board ever went down I could install this new board and keep the old locks?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
For some reason I can't see page 4 of this thread that I started. Anyone come up with a user manual for the square lock?
I received the parts and installed the new electronic lock and works great, I can now open my safe like I used to.
Unfortunately the keyed locks I received are the exact same locks, but too short - see photos. I did not realize they made a different lengths or would have disassembled and measured them 1st...DAMMIT!
Anyway as you can see by the photos each electronic lock comes with everything, a new horn, button, seloniod, battery box and back-up battery box for opening if your main batteries inside the safe die. The color is a nickel instead of chrome but looks fine to me....see photo of the new one installed. I'm working on getting the correct lock cylinders but for now if anyone is interested I will sell the new electronic locks for $50.00 a piece, plus shipping. Just message me and we'll figure out how to send.
Happy New Year everyone!
hmmm? Try againScott I emailed you and did not hear back
Do you still have the extra lock & keys?Here's a photo of my safe lock. there's stainless steel machine screws around the perimeter of the panel on the inside of the door. If you pull the panel off the entire lock system along with the arms that move the bolts are exposed. It's actually very simple how it works, the over-ride key operates the tubular lock that normally is operated with the electronic lock / electric solenoid. After entering the correct code the electric solenoid is triggered which pulls in a pin that's blocking the horizontal bar. After that is triggered the main key will turn which allows you to turn the wheel to pull in the bolts....and then you can open the door. Yeah, my "safe jargon" is probably not totally correct, but seriously not that complicated if you are at all handy and have a screwdriver and a couple wrenches. I've been a commercial general contractor / building operations engineer and maintenance manager my entire life - so I'm always figuring things out and repairing them.
(edited by moderator to work on an image resizing issue, no content was deleted or edited)
View attachment 644341
I have 4 electronic locks with peripheral components left - $75.00 to ship, as explained before the key cylinders are too short but the electronic lock and components work...I replaced mine and works good - used the same cylinders though. If you want the short cylinders I'll send them with the lockDo you still have the extra lock & keys?
I'm down to (4) locks now if you still want one speak now or....I would like a set. USPS flat rate would work for the shipping Can you take paypal?
I would like a set. USPS flat rate would work for the shipping Can you take paypal?
I've had the safe apart, that lock definitely would not work without taking a cutting torch or sawzall to the door. If I could step back in time I would have bit the bullet and shelled out the big bucks to a local retailer who sells safes.
Unfortunately I have a 1000lb boat anchor without a working lock, which is why I spent the time I did locating a replacement, hopefully it'll last until I don't care - and when I die the kids can figure out how to get it out of the basement....HA!
I would like one of the lock sets, PLEASE. How much, and how do I pay you? Thanks!I'm down to (4) locks now if you still want one speak now or....
possibly 3, have another guy asking about one now.
I would like a set. USPS flat rate would work for the shipping Can you take paypal?
I am missing the keys to my lock. Am hoping that the ones you have will give enough of a clue to allow making a new set, or might help in picking the lock. My electronic lock works, but needs the flat dimpled key to operate. Pardon my duplication of this question, I am new to the forum: how can I pay you? I do have a paypal account.I have 4 electronic locks with peripheral components left - $75.00 to ship, as explained before the key cylinders are too short but the electronic lock and components work...I replaced mine and works good - used the same cylinders though. If you want the short cylinders I'll send them with the lock
Looks like I, being new and stupid to this forum, have been replying to myself! I am missing the keys to my lock. Am hoping that the ones you have will give enough of a clue to allow making a new set, or might help in picking the lock. My electronic lock works, but needs the flat dimpled key to operate. How can I pay you? I do have a paypal account.I'm down to (4) locks now if you still want one speak now or....
possibly 3, have another guy asking about one now.
Hi Madmax.The lock I have is a AP8111. Google says it's a fairly commonly used lock for safes. Chinese made. I not see why you cant buy one.
You can down load a pdf of the picture I just attached