Southwest Firearms Forum
Advertise on Northwest Firearms
Oregon Arms & Ammunition
Defensive Arts
Sporting Systems
J&B Firearm Sales
RifleClass.com
Gun Deals
Buster Beaver Cerakote
Oregon Rifleworks
Low Price Guns
Welcome to Northwest Firearms
Join our community, sign up for free today!
Sign Up

Patriot Safe

Messages
19
Reactions
6
The main key cylinder and the backup key cylinder behind the door both have a longer body than what I received, the safe door is thick so need longer body lock cylinders.
All the peripheral parts just plug into the circuit board, no soldering. The lock cylinders hold the keypad on, I reused my existing lock cylinder and actually just plugged all the existing peripherals in to the new lock and saving them in case so one of those parts go bad - the board fried on my lock so I was opening with the keys only.
 
Messages
10
Reactions
0
Just as a follow up I ended up picking the tubular lock to get in, then replaced the batteries and all is good. Still think having another backup set would be good. After all that I found the keys to the tubular lock......can’t make this stuff up....
 
OP
MichaelLindsey
Messages
59
Reactions
31
For some reason I can’t see page 4 of this thread that I started. Anyone come up with a user manual for the square lock?
 
Messages
11
Reactions
6
I received the parts and installed the new electronic lock and works great, I can now open my safe like I used to.
Unfortunately the keyed locks I received are the exact same locks, but too short - see photos. I did not realize they made a different lengths or would have disassembled and measured them 1st...DAMMIT!
Anyway as you can see by the photos each electronic lock comes with everything, a new horn, button, seloniod, battery box and back-up battery box for opening if your main batteries inside the safe die. The color is a nickel instead of chrome but looks fine to me....see photo of the new one installed. I’m working on getting the correct lock cylinders but for now if anyone is interested I will sell the new electronic locks for $50.00 a piece, plus shipping. Just message me and we’ll figure out how to send.

Happy New Year everyone!

I would like a set. USPS flat rate would work for the shipping Can you take paypal?
 
Messages
2
Reactions
0
I lost my back up cylinder keys so this wouldnt work for me. I need to replace it all so I can have keys again. Do they have the longer cylinders where you bought those from?
 
Messages
19
Reactions
6
I’m working on that one, could be a while. I do have 7 more of the all the electronic *^<! if you’re interested. A couple other people on this forum messaged me and said they were interested and I replied with my email and...nothing since then. So I’m going to guess they weren’t serious about it??
 
Messages
5
Reactions
0
Here's a photo of my safe lock. there's stainless steel machine screws around the perimeter of the panel on the inside of the door. If you pull the panel off the entire lock system along with the arms that move the bolts are exposed. It's actually very simple how it works, the over-ride key operates the tubular lock that normally is operated with the electronic lock / electric solenoid. After entering the correct code the electric solenoid is triggered which pulls in a pin that's blocking the horizontal bar. After that is triggered the main key will turn which allows you to turn the wheel to pull in the bolts....and then you can open the door. Yeah, my "safe jargon" is probably not totally correct, but seriously not that complicated if you are at all handy and have a screwdriver and a couple wrenches. I've been a commercial general contractor / building operations engineer and maintenance manager my entire life - so I'm always figuring things out and repairing them.

(edited by moderator to work on an image resizing issue, no content was deleted or edited)

View attachment 644341
Do you still have the extra lock & keys?
 
Messages
19
Reactions
6
Do you still have the extra lock & keys?
I have 4 electronic locks with peripheral components left - $75.00 to ship, as explained before the key cylinders are too short but the electronic lock and components work...I replaced mine and works good - used the same cylinders though. If you want the short cylinders I'll send them with the lock
 
Messages
5
Reactions
0
I would like a set. USPS flat rate would work for the shipping Can you take paypal?
I’ve had the safe apart, that lock definitely would not work without taking a cutting torch or sawzall to the door. If I could step back in time I would have bit the bullet and shelled out the big bucks to a local retailer who sells safes.
Unfortunately I have a 1000lb boat anchor without a working lock, which is why I spent the time I did locating a replacement, hopefully it’ll last until I don’t care - and when I die the kids can figure out how to get it out of the basement....HA!
 
Messages
5
Reactions
0
I would like a set. USPS flat rate would work for the shipping Can you take paypal?
I have 4 electronic locks with peripheral components left - $75.00 to ship, as explained before the key cylinders are too short but the electronic lock and components work...I replaced mine and works good - used the same cylinders though. If you want the short cylinders I'll send them with the lock
I am missing the keys to my lock. Am hoping that the ones you have will give enough of a clue to allow making a new set, or might help in picking the lock. My electronic lock works, but needs the flat dimpled key to operate. Pardon my duplication of this question, I am new to the forum: how can I pay you? I do have a paypal account.
 

LATEST REVIEWS

  • Rapid Fire Arms
    5.00 star(s)
    Great place friendly service always take time to help you, great knowledge of products
    • RJSouth
  • Supporting Vendor Copeland Custom Gunworks
    5.00 star(s)
    Perfect install of peep sight on my cz 527 carbine. Price was right, was expecting it to be more. Will be my go to for anything I can't handle...
    • cd90caprice
  • Adaptive Firing Solutions
    5.00 star(s)
    I've been party to a couple transactions with Steve and he is a great guy to deal with.
    • titsonritz
  • TJ Gun Sales
    5.00 star(s)
    Purchased two handguns there and have one on consignment now nice folks!
    • rl280
  • Northwest Armory - Tigard
    5.00 star(s)
    Went in to help my buddy with his purchase and ended up trading in a 1911 towards a CZ SP-01 Tactical. They gave a higher price that some of the...
    • nosbocaj

SUPPORT NORTHWEST FIREARMS

Staff online