Holosun on M&P Shield Plus Zeroing Problems?

[Flat45]

Has anyone had any problems zeroing red/green dot on a Shield Plus? Saw several threads on S&W forums about the slide being milled at a slope. Sounds like CT and Shield go right on without issue, but if you install a plate in needs to be sloped? Curious if anyone has had any issues making their optic sit or work properly with the Shield Plus slide.
Thanks for the input.

Read More

 

[VinnieBoomBah]

An adaptor plate would need to sloped to square up the cut, JMHO this is a much better option and necessary to get the Holosun to work


Unless you're like me and just start hacking on your slide with a needle file

M&P Shield RMSc / 507K Optic Cut | Nameless Armament

This is for the machining and installation of optics that share the Shield Sights RMS footprint (Holosun 507K & 407K, Sig Romeo Zero, Swampfox Sentinal, etc...) on a M&P Shield or Shield Plus 9mm or 40 S&W (Non-EZ models). The optic will be located forward of the OEM rear sight. Price does not...

www.namelessarms.com