- Messages
- 16
- Reactions
- 38
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Seems pretty new school for you. I always had you pegged as using a grizz tallow moonshine concoction.I just spray the One Shot so some gets in the neck. Even when I "small base" for my M1a.
Grizz tallow is fer fryin' and shine is fer drinkin'!Seems pretty new school for you. I always had you pegged as using a grizz tallow moonshine concoction.
I run q Q-tip with this on the end zip tied to my press:I will be more specific. Rifle - .308 - re-sizing once fired cases - small base dies - expander ball needs lube. Seeking answers on how you folks apply lube and what you are using. Please
I'm currently using the Dillon spray lube. When that's gone, I will transition to homemade lanolin mix.
I place all the cases in a plastic container with the mouths facing up. I just give it a couple sprays, tilt it one way, another shot, tilt it the other, another shot, and then let it rest to let the alcohol evaporate.
Even if I use RCBS etc. sizing lube smeared on the mouth giggity I never remove it.I have purposely left the residual from one shot and the alc/lanolin lube in the cases and I can tell you it will not foul the powder charge or change ignition in any way,
as far as I could tell.