Benjamin marauder rebuild

[toadfish]

Does anybody know someone in the Portland or Vancouver area or anywhere else where I can take my Benjamin marauder to have it rebuilt because I have air leaks

Read More

 

[jbett98]

Ollie Damon's on NE Halsey St.
Address: 10240 NE Halsey St, Portland, OR 97220
Phone: (503) 232-3193

 

[edzz]

PROFESSIONAL AIRGUN REPAIR
RICK LAUMB 10445 SE COOK CT, PORTLAND , OR, 97222

Find a Service Center

 

[BoringCruffler]

@jbett98: Be aware; Ollie Damon's closed up for good as of last December.
@edzz: Thanks, I wasn't aware of that one.

 

[daved20319]

Why not do it yourself, they're easy rifles to work on, and seal kits are cheap. Plus PCP's are a piece of cake compared to a springer. And the Marauder makes it even easier, the hardest part is depressurizing the air tube, and they come with a tool just for that purpose. If you don't have one, PM me your address, I'm pretty sure I have a spare on hand. Probably have a full seal kit, too. Later.

Dave

 

[Shawn the Locksmith]

Why not do it yourself, they're easy rifles to work on, and seal kits are cheap. Plus PCP's are a piece of cake compared to a springer. And the Marauder makes it even easier, the hardest part is depressurizing the air tube, and they come with a tool just for that purpose. If you don't have one, PM me your address, I'm pretty sure I have a spare on hand. Probably have a full seal kit, too. Later.

Dave

Ditto....rebuild it yourself. I have 3 Marauders, 2 M-Rod's and a P-rod. They are very user friendly. Like Dave said, degas it first and have fun! Shawn

 

[Shawn the Locksmith]

Ditto....rebuild it yourself. I have 3 Marauders, 2 M-Rod's and a P-rod. They are very user friendly. Like Dave said, degas it first and have fun! Shawn

oh yeah....I put regulator in both M-Rods and replaced the gauge on the P-rod along with a hammer-bounce thingy (tech term). Be sure and get a tube of silicone lube and lube all your o-rings before re-installing. Don't overtighten nuttin!! finger tight and a little. hope this helps Shawn

 

[toadfish]

Thank you for all the replies I guess I will have to try and do it myself hopefully it'll work

 

[Shawn the Locksmith]

Thank you for all the replies I guess I will have to try and do it myself hopefully it'll work

go online and check out a couple of video on "Marauder Rebuild" or of the like and you'll get plenty of help. It worked for me, and I'm sure it'll work for you too. You Can Do It!! shawn