- Messages
- 11,081
- Reactions
- 50,429
- Thread Starter
- #21
Iron which one is your favorite? If you could only have one which one would it be?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thats the jig that @Caveman Jim has isn't it etrain. That is the one I am thinking of getting.
It is. He gives it high marks. I've seen some others have it too - all seem to really like it - plus you can buy some extra parts and do .308 lowers too.
It is. He gives it high marks. I've seen some others have it too - all seem to really like it - plus you can buy some extra parts and do .308 lowers too.
Just make sure you keep that bearing on the End Mill cleaned out and lubed really good I went through 4 lowers and the fifth one it started to chatter they sent me three free bearings, excellent customer service for d5 Tactical!!!
And 5D is a paid NWFA vendor now too - support them, support the site.
So far the MPX is, then the CX4, the CZ would probably be better if it didnt have a KAK shockwave blade uncomfortably slamming my shoulder. Might try a Thordsen Customs cheekrest or other cheekrest/brace.Iron which one is your favorite? If you could only have one which one would it be?
way to be an ambassador, caveman!You bet & they never heard of NWFA until I mentioned us...
way to be an ambassador, caveman!
Had an epifany last night. I think what I am going to do is start with a 5.56 or 300 black pistol. Then I can accomplish two things. Get a AR pistol and I can go get a jig and do my own lowers.
I think for now that is a win, win.
Not to be that guy that totally throws a thread off the rails by saying something completely different from what you are asking.........but have you shot a CZ Scorpion? Much smoother, more reliable and built from the ground up to shoot pistol calibers instead of wonky retrofitting. And for around $700, same ballpark as building an AR.
SKrueger,
Ever figure out which 5D Tactical jig you'd get? Something like this?
80% Lower Jig - Universal AR-15 80% Lower Router Jig | AR-9