Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
LEE BREECH LOCK HAND PRESS
Only have the Press no other parts see photos
Not looking for any trades at this time
Must be picked up in Vancouver
PLEASE MAKE ALL QUESTIONS OR COMMENTS IN A PRIVATE MESSAGE
NO AMMO CANS INCLUDED IN SALE
Just installed one of these - turns your 10/22 into a bolt gun for sub sonic
https://colossic.com/10-22-bolt-lock/
comes with a light recoil spring
by indexing the lock open, you can still fire semi auto, but only with sub sonic or standard velocity ammo
I can only say, works as advertised
I...
Magpul CTR Stock in FDE, commercial with receiver extension tube, buffer, spring, endplate and lock nut.
Used, great condition. Mounted on a rifle and fired with a few times.
Sell complete for $35 OBO. SOLD
Stock only cost new $55
Spring, buffer tube, buffer, endplate, and lock nut cost new...
Vintage Buck 515 Classic IV Lock Back. High polished aluminum handles have been nicely engraved and has a banner on each side for engraving names or whatever. Polished 425M stainless steel drop point. Minor scratches on the blade. Made in the USA.
No trades. Will ship at your expense.
Meet...
Smith and Wesson has a giveaway going on right now to win a no lock revolver and ammo.
https://swee.ps/EAvBzK_tZUOBb
I want the 629 mountain gun or the model 19!
Anyways thought I would share.
-E
Hard to find 629-4 44 Magnum, these are the best of the 629's, pre lock, pre mim, factory drilled and tapped for optics.
This one has the hard to find Power Port barrel, comes with original box and paperwork.
Comes with (3) speed loaders and case. Cash only on this one, NO trades. I will meet...
I inherited these, but I already have multiple single-stages and a Dillon setup, so really have no use for them. Brand new in box, unopened.
https://www.hornady.com/reloading/presses/lock-n-load-accessories/lock-n-load-case-feeder
https://www.hornady.com/reloading/presses/lock-n-load-ap#!/
The...
Brand New StopBox Chamber Lock Pro for AR15s.
Pretty cool device and works great. Was a gift and I just don't need it, so I thought I'd let it go for way less than it's worth.
Comes with the optional cable.
Anyone here have a CZ712 (or Huglu) semi auto?
Recently picked it up, used, with no history.
I noticed that the gun cannot be loaded unless it is cocked.
the loading gate/lifter wont move out of the way unless cocked.
Anyone else experience this?
Hard to find 629-4 44 Magnum, these are the best of the 629's, pre lock, pre mim, factory drilled and tapped for optics. This one has the hard to find Power Port barrel, comes with original box and paperwork.
Comes with (3) speed loaders and case. Cash only on this one, NO trades. I will meet...
Skip to just past half way point to see how a wheel lock works. First half is all about who owns edged weapons/etc and why. Skip to roughly 3/4 mark to see how this halberd gun works.
View: https://youtu.be/3koUbMYmNPQ?si=M9vBLrAVOTvEpyuC
If you know you know. One of the last great steel j frames smith made. Fantastic lockup, super tight and a great shooter. Let me know if you want any other pictures. Only trades are for bulk 9mm, silver bullion, mark iv threaded, sw 43c, 317 or 617 or threaded cz 457.
9712807241 for more...
FOR SALE ($800): Smith and Wesson Model 340PD revolver in 357 Magnum. This is Smith's lightest model, weighing 11.3 oz when wearing the lightest available grips. It has a frame made from scandium-aluminum and a titanium cylinder. It's a hammerless (internal hammer) 5-shot model capable of...
12 inch zev hangaurd unfinished raw aluminum without mounting hardware. You will have to call or email zev and ket the barrel nut and wedges for this 5.56 wedgelock handgaurd. You pay shipping.
Set it up and never used it :(. Comes with everything included in the box and the original box! I have also added the inline stand and the adapter bar for the power plants if you end up wanting them later. I also added the lite that illuminates the loading well. Strap it to your bench, add a...
Set it up and never used it :(. Comes with everything included in the box and the original box! I have also added the inline stand and the adapter bar for the power plants if you end up wanting them later. I also added the lite that illuminates the loading well. Strap it to your bench, add a...
I've come to the realization that reloading isn't for me. I haven't touched this equipment in years. I'm not even really sure what all is here. Press, shell holders, dies, components, brass, case cleaner, trimmer, puller, gauges. Take it all.
My review on this press:
https://www.northwestfirearms.com/threads/my-02-on-lee-pro-4000-breechlock-pro.500136
I was critical in my review, this press style is not my flavor.
This does load ammo fine now that it's properly aligned but with recent press acquisitions, I will not be needing it at...