Silver Supporter
Bronze Supporter
- Messages
- 4,214
- Reactions
- 6,921
Most usually in starting a thread like this, I would withhold my own response until others had contributed. In this case, I will start off by saying that I learned MULTIPLE options were open to use "other caliber" dies to accomplish things with a different caliber. A great example would be using a .221 Fireball die as a "neck sizing only" die for any similar caliber of longer case length (.222, .223). I have also used dies to act as a "Stage One" resizing die to ease the transition when re-forming from a parent case (As opposed to utilizing only the Full Length resizing die for such forming operations).
There is no prohibition here against something you discovered on your own, but found it published or noted at a later date (and wished you'd read that).
These are satisfying (and memorable when one "stumbles on them") discoveries and should be shared.
There is no prohibition here against something you discovered on your own, but found it published or noted at a later date (and wished you'd read that).
These are satisfying (and memorable when one "stumbles on them") discoveries and should be shared.