- Messages
- 3,380
- Reactions
- 4,737
I recently bought a Dillon Square Deal B setup from a member here that came with a vibratory case cleaner. I've been slowly collecting all the extras I'll be needing to put together some minor and major 40S&W loads for competition.
Today I made my first major step by running a load of 40 Starline brass in my cleaner. I am using walnut media with a couple caps of NuFinish and a splash of mineral spirits. I also threw in a few strips of dryer sheet to collect some of the powder junk that comes off the cases. I'll be using a media separator after about an hour of tumbling and go from there.
I'm excited to enter this new activity of reloading. "Honey, it will help me save money on ammo."
Today I made my first major step by running a load of 40 Starline brass in my cleaner. I am using walnut media with a couple caps of NuFinish and a splash of mineral spirits. I also threw in a few strips of dryer sheet to collect some of the powder junk that comes off the cases. I'll be using a media separator after about an hour of tumbling and go from there.
I'm excited to enter this new activity of reloading. "Honey, it will help me save money on ammo."