Stuck round in glock

Messages
4
Reactions
10
I learned the hard way also, don't use other people's reloads. I will not shoot reloads at all in fact. Even factory reloads have issues. But I'm sure there are tons of people that will say their reloads are awesome, so to each his own. Hopefully no one is carrying reloads at least.
 
Last edited:

DirectDrive

Messages
5,510
Reactions
10,117
Live round ?
If so, proceed carefully (had to say it)
Definitely a reload qc issue. Found two like this.
When you reload pistol you "bell" (or flare) the case mouth open, slightly more than bullet diameter.
This is so you don't shave off bullet jacket material as the the bullet is pushed in.
The you squeeze the case back into spec.

It's possible that your reloads still had some case flare that was not addressed properly.
And then it snagged on the way into the chamber.
 

UPCOMING EVENTS

Arms Collectors of SW Washington Gun Show
Battleground Community Center
912 E Main St, Battle Ground, WA 98604, USA
Cerberus Training Group - Skill Builder
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Cerberus Training Group - Skill Builder
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Cerberus Training Group - Run the Gun Pistol
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA

LATEST RESOURCE REVIEWS

  • Gooseneck Road
    4.00 star(s)
    8/1/2020
    We went there today, at the righthand fork past the shooter info sign, and at the spot where there's a fallen log across a trail; good backstop...
  • Tigard Pawn 4 More
    5.00 star(s)
    Tigard Pawn for privated transfers: Good to go
    Met someone from the board out in Tigard as he was purchasing three of my Mosins. First stop was at NW Armory but didn't realize they were closed...
  • Buster Beaver Design
    5.00 star(s)
    Great folks!
    Sold a pistol and bought one the same day at Buster Beaver. I got a complete tour of the facility and a briefing on some of their powder coating...
  • Copeland Custom Gunworks
    5.00 star(s)
    Above and Beyond
    I hand delivered an extremely sentimental firearm that needed rebluing. I hoped that he could get it looking half way decent again. Tim went...
  • Buster Beaver Design
    5.00 star(s)
    All around great people A+
    I have had Buster Beaver Cerakote a Sig P229 before and it came out flawlessly. I have also dealt with John a couple of times on firearms...
Top Bottom