Bronze Lifetime
- Messages
- 11,325
- Reactions
- 25,956
Had a 300RUM case get stuck last night. Arrggghhhh!
Having been down that road a few times before, here's how I handle it:
Tools: dent puller, #7 drill, 10-32UNF Tap, 10-32 x 1" screw
1) Back out the decapper rod.
2) Drill out the flash hole & tap.
3) Remove sheet metal screw from dent puller collar & replace with 10-32 machine screw.
4) Screw assembly into flash hole
5) mount die in a hole where you can get leverage for the ram. Here I'm using a drill press stage.
6) screw it all together and go to work.
Finished.
Having been down that road a few times before, here's how I handle it:
Tools: dent puller, #7 drill, 10-32UNF Tap, 10-32 x 1" screw
1) Back out the decapper rod.
2) Drill out the flash hole & tap.
3) Remove sheet metal screw from dent puller collar & replace with 10-32 machine screw.
4) Screw assembly into flash hole
5) mount die in a hole where you can get leverage for the ram. Here I'm using a drill press stage.
6) screw it all together and go to work.
Finished.