Staff Member
- Messages
- 11,211
- Reactions
- 40,983
I have had that happen once as well, but my glass is in a Burris PEPR one piece and all is torqued and tight.
the mount isnt "bridging the gap" between the receiver and handguard is it?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have had that happen once as well, but my glass is in a Burris PEPR one piece and all is torqued and tight.
Got the mount as well. Your good to go.
One of the Issues I heard about with the Rugers had been in the Barrel Bedding. I think you should give it a bit of polishing, check the bedding and STAY with the same ammo. Using "whatever" Ammunition during break-in is one thing but if you are checking for Accuracy then I don't think swapping out from one Group to the next is going to work.
ahhhh i see the problem.... you need a suppressor
ahhhh i see the problem.... you need a suppressor
if we ever meet up to shoot youre more than welcome to thread my can on there and try it out (if the brake comes off easy)Yes, I do. And if I can get the darn thing to tighten up I'd be more than happy to have it host one. But right now I want to throw it out a window!
if we ever meet up to shoot youre more than welcome to thread my can on there and try it out (if the brake comes off easy)
so youre saying the bolt gets harder to open and close the more you shoot it?
Yes, I do. And if I can get the darn thing to tighten up I'd be more than happy to have it host one. But right now I want to throw it out a window!
ya. WTF? wondering if theres some debris in there.Yeah, harder to close. In fact, I even had it jam once trying to seat a round. Full mag, empty chamber and the round wouldn't go into battery. I had to drop the mag and start over. WTF?
Can't blame you. You got out shot by a sub par shooter with a much better rifle!
Throws the round off trajectory?
Just a guess
everything look straight? barrel is going straight thru the handguard and not more toward one side? is it possible the barrel nut might not be tight?
not sure this would affect anything since a scope is zeroed to the barrel bore but assuming something is coming in contact with the handguard (bipod, shooting bag, lead sled) could the handguard be flexing or vibrating throwing it off somehow?To my untrained eye, everything looks true and is tight.
brother, i have tons of brass shavings/unburnt powder amongst other crud in my guns from shooting suppressed and accuracy still holds true. i dont think a few brass shavings are an issueView attachment 404761 View attachment 404762
These are the best I can do with my phone. The bore is clean and the rifling looks even. At least to me. How can some brass shavings affect it that much?