reloading mil sec brass

[Redneck Rampage]

I have a 50 cal ammo can of LC mil spec brass I what to reload.
I have seen online that the primers are harder to remove. Also they leave crimp makes.

I have seen a few ways of removing the crimp marks

1.) PRIMER SWAGER
2.) counter sink
3.) rcbi pocket tool

I would like to know how other people are doing it. is there a cheap ez way.

thanks

Read More

 

[yotehunter]

i use the pocket tool but any of the listed should work

 

[Grizzly_A]

I used the swager on my last batch of military brass. It worked fine, but you still have to process the primer pocket afterwards.

 

[carlz]

I have and have used an RCBS station with the crimp remover and pocket tool. I picked up about 1200 LC08 and it worked like a charm.

 

[Tom Herman]

I don't really notice any extra effort depriming mil crimp rounds.
As far as getting rid of the crimp, I use the Dillon swaging tool.

Happy Shootin'! -Tom

 

[Hotwheelz]

I use the RCBS chamfering- deburing tool cut down to fit in my drill

 

[nezz69]

i just finished 3000 rounds last month. if i had to do it with the kit from rcbs you couldn't give the brass to me for free and make it worth it.3000 rounds 3 hours with the dillion it's the only way to go