Bronze Supporter
- Messages
- 3,236
- Reactions
- 5,784
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have tried 6 browsers, (firefox, chromium, ie, edge, chrome, and brave) 2 windows PC's. Do they work better on mac or android or linux?eForms is legendarily buggy. What browser and device are you using?
I have tried 6 browsers, (firefox, chromium, ie, edge, chrome, and brave) 2 windows PC's. Do they work better on mac or android or linux?
Well I put in the application for my first SBR. Anywho, when you put in the serial on an AR lower, do you use a made up serial number you would engrave or the Serial on the piece. Because I may be ending up with the same SN engraved on here twice.
k. Description of Firearm and Markings. (1) Item 4a. If you are modifying an existing firearm, enter the name and location of the original manufacturer. If you are creating the firearm, enter the maker's name, city and state. (2) Item 4b. The types of NFA firearms are listed in the definitions; (3) Item 4c. Specify one caliber or gauge. If there is another designation, indicate the designation in item 4h. (4) Item 4d. Show the model designation (if known). (5) Item 4e and 4f. Specify one barrel length and overall length in items 4e and 4f as applicable. Note: if the firearm has a folding or collapsible stock, the overall measurement is to be made with the stock extended. (6) Item 4g. Do not alter or modify the serial number of an existing firearm . Enter the existing serial number or, if a new firearm, one you create. (7) Markings: The maker is required to mark the firearm with the maker's name, city and state as shown in item 3b. All markings are to be in compliance with 27 CFR 478.92 and 479.102
Okay been getting most of my info through looking at form 1 cans. Pardon my ignorance but does anything need to be engraved on the Lower with an SBR?
If someone "makes" an NFA firearm out of a Title 1 (non-NFA) firearm without engraving it to 0.003 inches in depth and at least 1/16" tall in a "conspicuous" manner then they have violated 27 CFR 479.102.My understanding, as is others I've asked, is that the engraving is only required when selling the SBR.
I thought so. And frankly, I knew something had to be engraved, so I shall fire up the old engraving machine and engrave it. Are there font requirements or can I use say, a font that I like that is say, modeled after medieval forms or even my own calligraphy? I have the tools to do this but do not want to run afoul of the BATFE. Btw I will likely go at least double required depth. Just to clarify it is highly legible.Yes, engrave the lower with the Form 1 applicant's name and city and state. There are ATF requirements for depth and size. For a lower that already had a serial number on it (Aero Precision, etc.) you don't add a second serial number. And definitely do not alter or remove the serial number on any gun.