- Messages
- 8,318
- Reactions
- 15,826
You can use small shims to fill the gap.. you can also use a cheap heat gun from Harbor Freight (or amazon) and knock those FSB pins out and replace the FSB entirely (Apex or AK builder) and have a proper front sight that has a muzzle device retaining plunger. That or if there are voids on the FSB made for a spring, plunger and roll pin you can Simply install one.
Not sure if the locktite will work too well as that rifle will get plenty hot.
Not sure if the locktite will work too well as that rifle will get plenty hot.