- Messages
- 316
- Reactions
- 1,073
- Ad Type
- For Sale
- Price
- $100
- Manufacturer
- Other / Not Listed
- City
- Vernonia
- State
- Oregon
- Zip Code
- 97064
Hello NWFA!
I own and operate a small machine shop just north of the town of Vernonia, and I have been offering a variety of gunsmithing services for the past 2 years. Re-bluing, threading muzzles, rechambering, blueprinting actions.... Below is a list with some rough pricing to give you an idea of my shop's capabilities, If you don't see something on the list, please feel free to PM me to see if it is something I can help out with! I can also receive and send out work through mail if Vernonia is too far a drive for you.
I own and operate a small machine shop just north of the town of Vernonia, and I have been offering a variety of gunsmithing services for the past 2 years. Re-bluing, threading muzzles, rechambering, blueprinting actions.... Below is a list with some rough pricing to give you an idea of my shop's capabilities, If you don't see something on the list, please feel free to PM me to see if it is something I can help out with! I can also receive and send out work through mail if Vernonia is too far a drive for you.
Barrel shorten & recrown (stripped barrel) | $80.00 |
Barrel threading (stripped barrel) | $100.00 |
Barrel shorten & thread (stripped barrel) | $120.00 |
Barrel shorten & recrown (disassembly required) | $150.00 |
Barrel threading (disassembly required) | $175.00 |
Barrel shorten & thread (disassembly required) | $200.00 |
AK barrel thread | $225.00 |
Lever action thread barrel, shorten mag tube | $350.00 |
Lever action cut and thread barrel, shorten mag tube, move front sight, fabricate front band | $600.00 |
Add collar to thread skinny barrels | $100.00 |
Time muzzle device to barrel threads (shimless) | $75.00 |
Add taper for Allen Engineering suppressor | $100.00 |
Flute barrel (stripped barrel) | $200.00 |
Fit, crown, and chamber contoured barrel blank | $350.00 |
Fit, thread, and chamber contoured barrel blank | $400.00 |
Fit, thread, and chamber contoured barrel blank (uncommon/new calibers) | $600.00 |
Bolt action rebarrel with no machine work required | $100.00 |
Bolt action rebarrel with machine work | $200.00 |
Other action rebarrel with no machine work required | $150.00 |
Other action rebarrel with machine work | $250.00 |
Full tear down, clean, lube, reassemble | $100.00 |
Pin & weld | $75.00 |
Remove pin & weld | $50.00 |
Bedding rifle stock | $200.00 |
Drill & tap for scope mount (customer supplies all hardware) | $150.00 |
Add custom oversized bolt knob | $175.00 |
Populate and headspace virgin AK barrel | $200.00 |
Refinish AK furniture set (strip, sand, stain, shellac) | $200.00 |
Re-line .22 barrel | $300.00 |
Drill and ream M16/M4 triangle front sight taper pins | $100.00 |
Jewel bolt (pre-polished bolt) | $150.00 |
Port pistol barrel and slide | $150.00 |
Remington 700 LRI side bolt release (machining only) | $150.00 |
Install grind to fit recoil pad | $150.00 |
Shorten wood stock length of pull | $50.00 |
Laser engrave for SBR | $75.00 |
Blueprint stripped Remington 700 action | $250.00 |
Re-blue long gun (hot caustic, does not include disassembly/reassembly) | $400.00 |
Parkerizing rifle | $300.00 |
| Rust blue a barreled receiver | $400.00 |
