Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
the only one out of 40 that did this never had this happen before and the powder load was mid range nothing hot
165 GR. SPBT IMR 3031 .308" COL 3.300" grs 45.0 Vel. (ft/s) 2707 51,000 PSI
That is not unusual for me (shooting an M1 Garand or when shooting 7.62x51 in my M1A). LC brass is good but, brass doesn't last forever.
I try to keep track of how many times I've re-loaded my brass. Then, I'll recycle my brass to "trash" prior to having one or two cases fail. I load in lots of a 100 or slightly more. And, I don't consider range pick up brass to be a reliable source for me.
I'll usually get only 3 reloads out of my M1A brass. And I don't anneal necks.
If you're using a bolt gun you may get better results.
Can we assume that the ammo was first fired through your chamber? Is it on the tighter side, say a commercial bolt gun from a reputable manufacturer?
Or, was it a well used bolt gun, w/ a military .30-06 chamber?
Or, are we to assume, that the ammo was first fired through an M1? Hey it's LC brass. That brass could be (maybe) streatched out quite a bit from the initial firing through an M1. Not to mention the violent extraction process. Just resizing it back down, may not "improve" the situation, if you know what I mean.
Tell us more?
Aloha, Mark
PS.......What about the brass? Was it made years and years ago? 1906-1920s, 1930s, 1940s, 1950s, 1960s, 1970s? Brass can be brittle with age and when not stored correctly.
Not to say anything about re-loaded brass life. But, more to the point of rifle chambers and variations.
Story Time.
My son bought an almost new looking used Rem 700 in .30-06. I had 100s of .30-06 reloaded ammo from my M1 days. Anyway, he took some of those reloads and did some target practice. The bolt was difficult to close and open.
Humm.....the ammo worked perfectly through my M1. So, I used my gauge and did some checking. The ammo still gauged and PASSED.
I ended up screwing down the re-sizing die down a bit more. The brass gauged alittle more to the "lower cut" on the gauge's acceptable level. That ammo could be chambered with less effort used to lock the Rem 700's bolt. And, opening the bolt was much easier. So, although the ammo could now be used with my son's Rem 700 and my M1, I would be subjecting the brass to more streatching if I used that ammo in my Garand.
Aloha, Mark
PS........from a bolt gun, I'd also expect more re-loads out of my brass. But sometimes, you just gotta say, "Oh well."
i have reloaded a lot of ammo from this lot of brass and this was the first fail ever. the brass came from a friend who shot it from a 1903. he did not like to reload so i have close to 1600 round of that brass reloading 250 round out of the lot 3 time and only one fail my 3006 is a wetherby vangard was not overly worryed about it just wanted to share.
I have lot of reloading buds and they have all had blowout in their brass in one spot or other. just means that this 250 rounds of brass are done. I will have to do the next 250.
If our Supporting Vendors don't have what you're looking for, use these links before making a purchase and we will receive a small percentage of the sale