You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
Discuss firearms and all aspects of firearm ownership
Join others in organizing against anti-gun legislation
Buy, sell, and trade in our classified section
Find nearby gun shops, ranges, training, and other resources
Discover free outdoor shooting areas
Stay up to date on firearm-related events
Share photos and video with other members
...and much more!
Being a do it myself type , I made my own from a grade 8 ,1/4" bolt . I turned it down the size of a .22 caseing and put a bit of taper on front end . Polished it up with emery paper then heated it up nonmagnetic and quenched in oil.
I started real gentle in chamber pushing burr from striker hits and worked the metal back until iron would go in chamber . Went out and testfired and empties didnt hang up any longer nor have any bulges .
If you dont have a lathe you can use a drill press or hand drill , files and sandpaper to make an 'iron' .