- Messages
- 82
- Reactions
- 22
- Thread Starter
- #21
I did the pretty much the same SBR as yours, only I havn't noticed any movement with mine. Otherwise I might have considered it,,,
Great little guns,,,
View attachment 225983
100% agree! Most fun I've ever had with one. I like your paint job, it got me to thinking I may take mine to be Cerakoted by my guy (when I have other stuff to be done too, I get discounts) he's local and runs GH Coatings and I HIGHLY recommend him for any Cerakote jobs you may consider. More than I can say about him here, but suffice it to say he's the only guy I use, period.
So how is it you have no play? You can't move the receiver up or down by pushing on the top of receiver or bottom of trigger guard? I'm guessing your barrel fits in your stock? Not "FF'ing" (as in removing the stock material under the barrel so it doesn't touch)? Maybe a six inch barrel that touches the stock is enough for that one screw to lock it down. Or does yours maybe have a tang molded into the back? Can you remove your action straight up and out, or are you required to pull the barrel up first, then pull the action out?
If you can pull it straight out, you don't have a tang and could be susceptible to movement, though maybe it's minor or even insignificant.