Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
Discuss firearms and all aspects of firearm ownership
Join others in organizing against anti-gun legislation
Find nearby gun shops, ranges, training, and other resources
Discover free outdoor shooting areas
Stay up to date on firearm-related events
Share photos and video with other members
...and much more!
spr
The Pindad SPR (abbreviation from Indonesian : Senapan Penembak Runduk, Sniper Rifle) is a sniper rifle produced by PT. Pindad, Indonesia. This gun allows the shooter to adjust the height of the position and stability by regulating the bipod of the rifle located on the bottom front of the handguard. The SPR is available in three variants. The SPR-1 and SPR-3 are chambered for the 7.62×51mm NATO cartridge while the SPR-2 is chambered for the .50 BMG cartridge.
Assembled Ballistic Advantage 1:8 twist SPR rifle gas barrel; BCM MCMR-15 with Centurion panels, no BCG/CH, Optics NOT included, priced to move!!! Would trade for higher end dots/magnifier combos (no Eotechs).
Up for sale is an 18" ultralight SPR upper built with very rare and hard to find parts. It has an original BCM KMR-15 handguard. Not the new aluminum KMR-A that BCM makes today. It's the original aluminum/magnesium blend that were impossible to find in stock when BCM was making them. Extremely...
Bison Armory complete upper receiver
18" fulcrum barrel w/pinned gas block, bead blasted and fluted
15" SLR SOLO light keymod rail
Bison BCG
BCM medium charging handle
Two 5 slot metal rails
BCM vert grip
rail covers
A2 style muzzle device
Shipping to your door included in asking price...
Newish magpul PRS Lite stock I got for my 6.5 DMR build that did not work out for me due to my short length of pull and this being a fixed stock. I love the stock- it just is too long for me. No scratches or wear, and wasn't on my AR for very long. I'd like to get $85 for it
18" upper receiver is a mix of Criterion and BCM parts. All were purchased new by me from either Criterion or BCM. I have a shot multiple 5 round groups in the .5-.7 MOA range and put hits on 12" steel out to 800 yards. This barrel loves 77gr IMI and 77gr FGMM but it will also shoot 1" groups...
I love this setup and am only selling to upgrade my 18" to a NX8 or ATACR. I Have all the original packaging. This setup is very light and weighs just under 30oz as pictured. Looking to sell as whole package but would split if someone just wanted to NXS. Items/condition listed below.
Scope...
For Sale / Trade
B King Firearms Barrel
6.5 Grendel, 8T 18" SPR profile
Type II .136 bolt face
416-R Stainless
Less than 25 Rnd through it.
$100 or trade
trades
Powder, primers, bullets.
Located In Sweet Home
Description: New unfired 18” Criterion Core .223 Wylde chamber and rifle gas length. Badger TDX gas block dimpled and set screws torqued to 20” lbs per badger specs. BCM Blem upper receiver with start forge and BCM4 laser engraving (Used). Has a 15” BCM MCMR on it right now but I can easily swap...
Looking to pass on a project I may never get around to finishing. Barrel is new and unfired except for by Criterion before it was shipped.
-BCM Blem upper receiver
-Criterion Core 18”, rifle gas, .223 Wylde
-Badger TDX gas block, barrel dimpled and screws set per Badger instructions
-Milspec...
Selling an 18" Douglas barrel chambered by Compass Lake for Oregon Rifleworks. Ive had it for about 4 months and shot 4x 5 round groups of 7 different commercial ammo brands/weights to test accuracy. Ive put exactly 140 rounds though it to date. Barrel has "Oregon Rifleworks" laser etched at the...
Built this rifle because I was infatuated with the Mk12 mod 1 but I'm not a cloner nor do I care about being "clone correct" and just wanted to smoke some coyotes with it but it just sits and never gets used. I like my bolt guns too much.
Lower Specs:
- Vltor IMOD stock (color is...
Oregon Rifle Works 18” rifle length gas Barrel
Douglas barrel blanks, chambered by Compass Lake Engineering
.223 Wylde
1/7 Twist
Button rifled
416R stainless steel
Bead blasted finish
Will include a new Aero phosphate gas block (no logo) and stainless gas tube with full price offer.
Had plans...
Selling my Daniel Defense MK12 5.56mm (18” barrel) comes with 5 Magpul mags and Factory case. Everything is as it came from the factory. 150-200 rounds fired in a couple range trips then I cleaned it and it has sat in the safe since. Condition is excellent and like new.
~700 rounds of factory...
Selling a lightly used 16" Centurion Arms RECCE barrel with Centurion Lowpro gas block and gas tube. I've put 260 rounds of IMI Razor Core 77gr match ammo though it.
Specs from Centurion:
Material: 416R Stainless
Barrel extension: M4 feed ramps
Chamber: optimized for use with MK262 (Black...
Up for sale is a swampfox arrowhead 1-8 with a guerilla dot bdc it’s in like new condition not really a fan of it so letting it go on a aero mount included
Aero upper and handguard vg6 delta mil spec charging handle 556 18” barrel rifle length gas system ran really smooth has about 100rds through it no bcg missing dust cover and forward assist was setup for spr type build but plans changed has some scuffs nothing major open to offers
Bought last summer and then while I was waiting for it to arrive I ended up building another 16” upper.
I mounted this and fired 20 rounds of 77gr HPBT MatchKing though it. Best group was .75” at 100 yards with a fixed 10x off a bipod with no rear support.
Comes with the Larue BCG and...
LT204 LaRue C.A.N. QD SPR Mount with 30mm ring halves $200
Purchased new from Larue few years ago. Installed for a few range trips then it sat in the safe and ultimately parts box til now.
$195 F2F powell butte area
$200 shipped firm, no trades. Venmo, Zelle, Cashapp, money order, crypto (BNB...