Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
Discuss firearms and all aspects of firearm ownership
Join others in organizing against anti-gun legislation
Find nearby gun shops, ranges, training, and other resources
Discover free outdoor shooting areas
Stay up to date on firearm-related events
Share photos and video with other members
...and much more!
ar barrel
The ArmaLite AR-10 is a 7.62×51mm NATO battle rifle developed by Eugene Stoner in the late 1950s and manufactured by ArmaLite, then a division of the Fairchild Aircraft Corporation. When first introduced in 1956, the AR-10 used an innovative straight-line barrel/stock design with phenolic composite and forged alloy parts resulting in a small arm significantly easier to control in automatic fire and over 1 lb (0.45 kg) lighter than other infantry rifles of the day. Over its production life, the original AR-10 was built in relatively small numbers, with fewer than 10,000 rifles assembled. However, the ArmaLite AR-10 would become the progenitor for a wide range of firearms.
In 1957, the basic AR-10 design was rescaled and substantially modified by ArmaLite to accommodate the .223 Remington cartridge, and given the designation ArmaLite AR-15.In 1959, ArmaLite sold its rights to the AR-10 and AR-15 to Colt Firearms due to financial difficulties, and limitations in terms of manpower and production capacity. After modifications (most notably, the charging handle was re-located from under the carrying handle like AR-10 to the rear of the receiver), the new redesigned rifle was subsequently adopted by the U.S. military as the M16 Rifle. Colt continued to use the AR-15 trademark for its line of semi-automatic-only rifles, which it marketed to civilian and law-enforcement customers as the Colt AR-15. With the expiration of its patent, other manufacturers began producing their own variants, known as AR-15 style rifles.
I recently moved to Oregon and do not know yet who the go to people are for assembling an upper. I have done most of my own work out of state but dont have a Geissele reaction rod or Midwest Industries upper receiver rod. I have a vice but haven't attached it to a bench yet.
I have a new...
Brand new unfired take off from a complete upper.
Carbine length gas.
.750 gas block.
1/16 twist.
Link to the barrel:
https://www.aeroprecisionusa.com/20-350-legend-cmv-carbine-length-barrel
Will ship if you pay for shipping. I can take PayPal and I will eat the goods and services fee.
Bought this earlier this year thinking I was going to do a pistol build. Never happened and its been sitting on my shelf. Decided to clear some space. Live in Vancouver but can deliver to PDX area for a few extra bucks. $80 OBO.
Text on Barrel says "5.56 x 45 NATO 1/7 4150 CrMoV V1014"
No...
Anyone swapped their barrels out recently?
I'm considering swapping barrels on one of my ARs to 5.56 from .300 (same barrel length). I know BCG is the same, and it looks like the gas block is the same on the 2 applications as well. It seems like a pretty simple, straight forward job if you’ve...
Looking to sell my brand new never fired or installed barrel.
7.62x39 16" barrel for ar15
Manufacturer: BALLISTIC COMPANY
Chamber: 7.62x39
Contour: Socom Contour
Fluted: No
Length: 16"
Twist Rate: 1:10
Gas System: Carbine Length
Diameter at Gas Port:.750
Thread Pitch: 5/8X24
Feed Ramps: M4...
Looking for a 14.5” or 16” AR barrel chambered in 5.56 with a pinned FSB. Prefer it to be 1/7 twist with a carbine length gas system. Can be CMV or CHF. Just looking for the barrel, no receiver. Used or new is fine, not looking for anything high end. See photo for reference.
Looking to do kind of a modern MK18 style build. Figure ill start gathering parts prior to Jan 1 26 when I can SBR it without the $200 fee.
I know 10.3 is "proper" but 10.5, or hell even 11" and I would be happy.
Looking for JUST a barrel, maybe with a FSB if its pinned to it, but don't need...
11.5" barrel with a 5.5" flash guard, they can be welded to make a 16" rifle set up or run the barrel as a pistol. Nothing else included just stripped barrel in nice condition. $40
I have an unused never assembled 16" .399 blackout 1:7 barrel the shows no signs or wear from being installed. With it I have a used dust with .300 BO markings. Finally I have 18 rds of FC full metal jacket ammo. Asking $70.00 shipped or $60.00 FTF.
11" Ballastic advantage barrel
Mounted but never had any rounds thru it.
Just fyi. No gas block needed
80.00 firm cash.
Not looking for any trades and meet for pickup at Hillsboro Sportsman's
Looking for someone local to me that can help swap out barrel nuts on my AR upper.
I was going to take it to a shop but they won’t have it done in time for my range day on the first.
I can pay cash of course, or trade some ammo, gun stuff.
? in title. I am looking to hear from users who have had AR barrels that wouldn't shoot better than 3 MOA. What brands models, round counts, caliber, optic type, etc? What type of ammo did you try?
I am thinking about placing a want ad for a super cheap accuracy challenged barrel to see if I...
For Sale
Proof Research: 22 ARC, Stainless Steel, AR Barrel, 1 - 7 Twist, 20"
Round count. 350
Rifle plus 1 gas tube included.
50 pcs, 2x fired (in this barrel) StarLine 6.5 Grendel brass necked to 22 cal.
Nice shooter
$450 shipped
No e payment,
16.5 barrel. Manufacture unknown. Probably psa. 556 nato 1-8. F marked front sight. Only one sight pin. Gas tube but no gas tube roll pin. Magpul handguard installed. Delta ring in place.
Can meet in Hillsboro beaverton or newberg
I bought this a couple of years ago and only put 22 rounds through it. I was going to work up some loads and never got into it. Includes 2 sets of dies. Will ship on buyers dime. $400
I also have 778 Speer 87 gr tnt bullets that I will sell for $125