Will this affect my zero/accuracy?

[Illuminaughty]

heres one on sale. Ive actually ordered this one myself.

Warne 1-Piece Gen 2 X-SKEL 1-Piece Cantilever Picatinny Scope Mount

Based on Warne's innovative R.A.M.P. Mount platform, this Gen II Edition has all the features you need. The X-SKEL Mount offers a lightweight scope...

www.midwayusa.com

Many thanks sir

 

[Member 34319]

Am I the only one thinking there appears to be plenty of rail to mount regular xtra high rings?

OP what is your objective size?

 

[Flopsweat]

Looks like you got the low version for LPVOs. For most scopes, about a 1.5" rise works great on an AR.


EDIT: Well never mind then.

 

[Illuminaughty]

Am I the only one thinking there appears to be plenty of rail to mount regular xtra high rings?

OP what is your objective size?

50mm objective size, the mount pictured is a 1.5in high mount.

 

[Kruel J]

You don't want the mount that close to the receiver. It WILL slap it.

 

[Illuminaughty]

You don't want the mount that close to the receiver. It WILL slap it.

That was my suspicion too, appreciate the feedback

 

[Illuminaughty]

Looks like you got the low version for LPVOs. For most scopes, about a 1.5" rise works great on an AR.

Here's a pic with the 1.5 mount, seems to have plenty of clearance, apx 3/4 clearance inch at the objective side

 

[Koda]

Here's a pic with the 1.5 mount, seems to have plenty of clearance, apx 3/4 clearance inch at the objective side

View attachment 1393737

Nice build.

the thing I dont understand about that Monstrum mount is why bother with cantelevering the mount if they arent going to clear the rail. It would be stronger to move the forward mount right under the forward ring.

anyways, that build deserves a nicer mount.

 

[Illuminaughty]

Nice build.

the thing I dont understand about that Monstrum mount is why bother with cantelevering the mount if they arent going to clear the rail. It would be stronger to move the forward mount right under the forward ring.

anyways, that build deserves a nicer mount.

Thank you, going for a DMR style. It's rocking a nice 20in heavy profile barrel.

I feel like the warne you turned me on to will go perfectly. Next on my hit list is to replace the Amazon bipod…

 

[titsonritz]

Looks like you got the low version for LPVOs. For most scopes, about a 1.5" rise works great on an AR.


EDIT: Well never mind then.

The picture in the OP is the standard 1.50" height, the ultra low 1" is crazy low. A 1.5" is roughly 1/3 co-witness, personally I prefer 1.93" and above for my AR optics. I am going to try a BO C1 1.7" but currently my low end is at 1.93".

 

[Member 34319]

50mm objective size, the mount pictured is a 1.5in high mount.

With the relief in the rail, from the picture you posted, you might get away with running plain ole high rings. That would also lower the thing a bit as in that mount it looks more like a chin weld might be needed.

 

[Flopsweat]

The picture in the OP is the standard 1.50" height, the ultra low 1" is crazy low. A 1.5" is roughly 1/3 co-witness, personally I prefer 1.93" and above for my AR optics. I am going to try a BO C1 1.7" but currently my low end is at 1.93".

Yeah, I caught that. That's why I edited my post.

 

[techieguy]

LaRue tactical make some excellet scope mounts as well, I've used a few of their products.

 

[ron]

The picture in the OP is the standard 1.50" height, the ultra low 1" is crazy low. A 1.5" is roughly 1/3 co-witness, personally I prefer 1.93" and above for my AR optics. I am going to try a BO C1 1.7" but currently my low end is at 1.93".

A standard A2 sight is 1.365" (200 yards) to 1.465" (600 yards) above the receiver. I like this freedom Reeper
one piece 30 mm mount it is 1.38" above the receiver to get a good cheek weld on the stock. Also has 3.8 " forward
offset to get the scope far enough forward. Nose on the charging handle. No Loctite needed and available
with 20 MOA elevation.

Amazon.com

Freedom Reaper Scope Mount, 30mm, Matte Black, 20 MOA

4FR30-20 – This mount has 20 minutes of elevation and is made for scopes with a 30mm tube. The Freedom Reaper mount is machined from billet aluminum and comes in a matte black anodized finish. Height is 1.38 above the rail and the mount has 3.8” of forwa

www.whiteoakarmament.com

 

[Koda]

A standard A2 sight is 1.365" (200 yards) to 1.465" (600 yards) above the receiver. I like this freedom Reeper
one piece 30 mm mount it is 1.38" above the receiver to get a good cheek weld on the stock. Also has 3.8 " forward
offset to get the scope far enough forward. Nose on the charging handle. No Loctite needed and available
with 20 MOA elevation.
View attachment 1394462

Amazon.com

Freedom Reaper Scope Mount, 30mm, Matte Black, 20 MOA

4FR30-20 – This mount has 20 minutes of elevation and is made for scopes with a 30mm tube. The Freedom Reaper mount is machined from billet aluminum and comes in a matte black anodized finish. Height is 1.38 above the rail and the mount has 3.8” of forwa

www.whiteoakarmament.com

Why would a scope need to be that far forward? Is the mount specific to a "scout" scope setup?

 

[ron]

For prone or sitting as in Highpower competition "Service Rifle" class. Good cheek
weld in prone position nose on the charging handle.

Highpower

The high power rifle course of fire is based on the NRA National Match Course. Rifle types include: Service rifle: M1, M14/M1A, and M16/AR15. NRA Match rifle: Cal .223 to .30-06 metallic sights...

www.ossa.org

https://www.ossa.org/uploads/2/5/3/2/25326702/2023_highpower_schedule_version_3.pdf

 

[Koda]

looks uncomfortable to me but I dont shoot competition so maybe its better for them. Interesting is all.

 

[titsonritz]

looks uncomfortable to me but I dont shoot competition so maybe its better for them. Interesting is all.

Not my type of shooting either, as mentioned above I prefer taller mounts for most of my ARs.

 

[Koda]

Not my type of shooting either, as mentioned above I prefer taller mounts for most of my ARs.

Sometimes I wonder if I have some weird short eye relief because Im actually trying to move my scope back a half to 1 inch. Why I ordered the Warne mount I mentioned above its rings are spread out more than my current mount. I also have an BUIS so Im limited on how far back I can put the mount.
I bought a Magpul PRS stock and think the cheek piece doesnt extend forward enough by an inch either.

 

[titsonritz]

Sometimes I wonder if I have some weird short eye relief because Im actually trying to move my scope back a half to 1 inch. Why I ordered the Warne mount I mentioned above its rings are spread out more than my current mount. I also have an BUIS so Im limited on how far back I can put the mount.
I bought a Magpul PRS stock and think the cheek piece doesnt extend forward enough by an inch either.

I'm going to change out my Magpul PRS stock and rifle RE for a B5 Systems Collapsible Precision Stock and A5 RE.