Turkish mauser measurement

[Vendor Hidden]

From the front of the rifle how much bare barrel extend from the end of the stock

Thanks

Read More

 

[Dozer99]

First we would need to know which Turkish Mauser (there are quite a few models that the Turks used). Also need to know which bayonet mount you are using. A rough guess for a K98 type stock with a 23 5/8 inch barrel is 6 inches but need to know where you need it measured from.

If it's a forestry carbine, then 3/4 inch from end of wood to end of barrel. More info is needed.

 

[Vendor Hidden]

First we would need to know which Turkish Mauser (there are quite a few models that the Turks used). Also need to know which bayonet mount you are using. A rough guess for a K98 type stock with a 23 5/8 inch barrel is 6 inches but need to know where you need it measured from.

If it's a forestry carbine, then 3/4 inch from end of wood to end of barrel. More info is needed.

Vz24 turkish mauser

 

[Dozer99]

I will measure mine later this evening and let you know.

 

[Dozer99]

6" from the end of the barrel band to the tip of the barrel.

 

[Vendor Hidden]

6" from the end of the barrel band to the tip of the barrel.

Thanks looks crazy short compared to a mosin

 

[Dozer99]

Remember the bayonet lug sticks out around 2 inches more as well. The GEW 98 were a bit longer but not much.

 

[Vendor Hidden]

Remember the bayonet lug sticks out around 2 inches more as well. The GEW 98 were a bit longer but not much.

thanks I'm building one from barrel and receiver.