Welcome to Northwest Firearms
Join our community, sign up for free today!
Sign Up

Build Thread Remington V3 TAC13 Questions

CountryGent

Messages
8,648
Reactions
25,393
So, I'm thinking of acquiring a Remington V3 TAC13 for the basis of a Form 1 project. I've googled it a bit, but am not finding ready answers. On that point a couple questions:

  • I'm not up on all things Remington, so what action is this based on? I can't imagine they built one just for this setup, so it must be based upon one of their current, Title I, offerings.
  • The reason I ask is, largely, furniture. After I have stamp in hand, I'm going to install a stock on it. If wood furniture is available, all the better, as I can't stand plastic. Regardless of material, readily available stocks would be a must for this project.
Thanks much!

P.S. Zero interest anything in "arm brace". I have my reasons and my shorty builds over the years are all NFA-registered.
 

Kruel J

Messages
13,524
Reactions
46,513
I'm just guessing here..1100?
 

Kruel J

Messages
13,524
Reactions
46,513
Interesting. Visually, that appears to be a match.
That's why I guessed it. I don't think Remington would engineer a whole new action for such a device. I'm interested to see the "final product" you are longing for. :)
 
OP
CountryGent

CountryGent

Messages
8,648
Reactions
25,393
That's why I guessed it. I don't think Remington would engineer a whole new action for such a device. I'm interested to see the "final product" you are longing for. :)
Agreed, my friend. I can't believe they'd concoct something out of whole cloth for such a secondary offering. I'm no expert in anything Remington, but still I can't imagine that is the case. And, if so that does open up all sorts of possibilities, materials and otherwise. Once papered, parts acquisition, and the old slice and dice. :)

(I'm eager for the next NFA project, because the last one was almost three years ago, and, man, what a dumpster-fire that transfer was. The better half has, verbally and metaphorically, smacked me upside the head the last couple weeks to get going on a machine-gun. I have my reservations, for various reasons, though don't disagree with her reasoning. Be that as it may, there is nothing wrong with a wacky side project. But, I digress.)
 

Kruel J

Messages
13,524
Reactions
46,513
Agreed, my friend. I can't believe they'd concoct something out of whole cloth for such a secondary offering. I'm no expert in anything Remington, but still I can't imagine that is the case. And, if so that does open up all sorts of possibilities, materials and otherwise. Once papered, parts acquisition, and the old slice and dice. :)

(I'm eager for the next NFA project, because the last one was almost three years ago, and, man, what a dumpster-fire that transfer was. The better half has, verbally and metaphorically, smacked me upside the head the last couple weeks to get going on a machine-gun. I have my reservations, for various reasons, though don't disagree with her reasoning. Be that as it may, there is nothing wrong with a wacky side project. But, I digress.)
I look forward to it!
 

flinch

Messages
13
Reactions
15
So, I'm thinking of acquiring a Remington V3 TAC13 for the basis of a Form 1 project. I've googled it a bit, but am not finding ready answers. On that point a couple questions:

  • I'm not up on all things Remington, so what action is this based on? I can't imagine they built one just for this setup, so it must be based upon one of their current, Title I, offerings.
  • The reason I ask is, largely, furniture. After I have stamp in hand, I'm going to install a stock on it. If wood furniture is available, all the better, as I can't stand plastic. Regardless of material, readily available stocks would be a must for this project.
Thanks much!

P.S. Zero interest anything in "arm brace". I have my reasons and my shorty builds over the years are all NFA-registered.
it's the v3 action, it's entirely different than the 1100 action. there's a wood stocked full size version, if you're going to register you could just cut it down
V3 Field Sport
 
Messages
140
Reactions
233
it's the v3 action, it's entirely different than the 1100 action. there's a wood stocked full size version, if you're going to register you could just cut it down
V3 Field Sport
The V3 field sports use their own stocks and foregrips. They are not interchangeable with other model's stocks like the 870 or 1100 so there is little current aftermarket support. The tac13 does however come with an adapter for 870 stocks.
 

NEW CLASSIFIED ADS

LATEST REVIEWS

  • Northwest Arsenal
    4.00 star(s)
    I have been there at least a couples times. We popped in today to see if the had a PS90. They...
    • CountryGent
  • Sunset Firearms
    5.00 star(s)
    Great guy. I've done multiple private transfers over several years. Knowledgeable and thorough.
    • markebrit
  • J&B Firearm Sales
    5.00 star(s)
    I've done many transfers with these guys. They know their stuff, they're very approachable and...
    • Art_Vandelay
  • J&B Firearm Sales
    5.00 star(s)
    I've always felt comfortable at J&B, first time I ever went there I walked out with a new Glock...
    • Zapata47
  • Money Market Pawn Shop
    5.00 star(s)
    Maybe I'm biased since I live 5 minutes away, but Peter and his crew have always been friendly...
    • Zapata47