So I started reloading with the Titgroup powder. I reloaded about 15 rounds for test firing before making any further big batches. I fired them this morning and I noticed that there was muzzle flash every time I fired each of those 15 rounds. I also noticed burn marks at the end of my muzzle. Normally, I see muzzle flashes randomly every few rounds with with factory rounds or my other reloaded rounds. To all those experienced reloaders out there, is this something to be concern about? Is this a sign that I need to lessen my powder amount?
Here's my techincal specifics:
4.2 to 4.3 grains of Titgroup (Based on Lyman's 49th & from from other reloaders from this website)
115 grain Xtreme or Berry's plated bullets
Range pick brass
Glock 43
S&B or Winchester small pistol primers
Lee Classic Turret
Bullet length close to the max of 1.169 as to not have too much pressure
Thanks to everyone in advance for all your answers.
Here's my techincal specifics:
4.2 to 4.3 grains of Titgroup (Based on Lyman's 49th & from from other reloaders from this website)
115 grain Xtreme or Berry's plated bullets
Range pick brass
Glock 43
S&B or Winchester small pistol primers
Lee Classic Turret
Bullet length close to the max of 1.169 as to not have too much pressure
Thanks to everyone in advance for all your answers.