Bronze Supporter
- Messages
- 2,288
- Reactions
- 1,671
<broken link removed>
$50 each
I have 10 available, so buy as many as you need.
•Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
•Reinforced corners and edges for additional impact protection
•Two sets of handles - carry & tie-down
•Recessed hardware for extra protection
•Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
•Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
•Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container walls
•One-piece construction, molded from lightweight, high-impact polyethylene
Click here to learn more about this type of case from the manufacturer's website.
Dimensions & Weight:
•Exterior: L 80.75" x W 22.43" x H 14.97" (each)
•Interior: L 78.87" x W 19.43" x H 13.28" (each)
•Weight: 60.8 lbs (each)
Condition:
•Good overall - working at time of decommission
•Normal wear from previous shipping & use in industrial environment
•It is possible there may be an occassional piece of lock hardware that is bent or missing
•Note: These cases previously contained a pop-up racking system that has been removed
•Up to 12 small holes from screws or rivets may be present in the bottom of each case (see detail photos)
•Local pick up only Located in Lincoln City, Oregon.
<broken link removed>
$50 each
I have 10 available, so buy as many as you need.
•Molded-in, tongue-in-groove gasketed parting lines for splash resistance and tight seals, even after impact
•Reinforced corners and edges for additional impact protection
•Two sets of handles - carry & tie-down
•Recessed hardware for extra protection
•Positive anti-shear locks, which prevent lid separation after impact, and reduce stress on hardware
•Molded-in ribs and corrugations for secure, non-slip stacking, columnar strength, and added protection
•Patented molded-in metal inserts for catch and hinge attachment points, which provide strength and spread loads to the container walls
•One-piece construction, molded from lightweight, high-impact polyethylene
Click here to learn more about this type of case from the manufacturer's website.
Dimensions & Weight:
•Exterior: L 80.75" x W 22.43" x H 14.97" (each)
•Interior: L 78.87" x W 19.43" x H 13.28" (each)
•Weight: 60.8 lbs (each)
Condition:
•Good overall - working at time of decommission
•Normal wear from previous shipping & use in industrial environment
•It is possible there may be an occassional piece of lock hardware that is bent or missing
•Note: These cases previously contained a pop-up racking system that has been removed
•Up to 12 small holes from screws or rivets may be present in the bottom of each case (see detail photos)
•Local pick up only Located in Lincoln City, Oregon.
<broken link removed>
