New Reloader, Have Question About Titegroup

[Florida6624]

Looks like the question has been asked before.
See post #9 for a more detailed response from Berry's :

Load for Titegroup and plated bullet

I bought a bunch of Berry's copper plated 9mm bullets (115 gr RN) but can't find a load using Titegroup. I can always get another brand of powder if that's what I need to do, but I'd prefer to limit the different types I have. Lee has a load for a 115 grain jacket bullet with a starting load...

www.thehighroad.org

X-Treme and Berry's are probably the most common plated bullets that you will come across.
Titegroup data in here :

https://xtremebullets.com/v/vspfiles/downloadables/RELOADING%20MANUAL2021.pdf

Pro Tip :
I've printed and have had bound several different manuals on different subjects from PDF files.
If the manual is in color, then a color printer works best.
It also works best, if your printer can print both sides of a page (duplex printing).
Not super-necessary, though.
Take your printed pages to an Office Max (or similar) and they will bind it for a small charge.
Choose your cover types and binder types (plastic or spring)

Great Information!

 

[partsed]

TrailBoss resembles a snowflake in appearance so consider using that.

Best used for bunny fart loads then??

 

[oremike]

I haven't tried Trail Boss in 9mm. But the general consensus on the "net is that you can't get enough in the case to cycle the action.