- Messages
- 72
- Reactions
- 24
As of yet, no blackhawk retension holster exsists for a mp sw 2.0 10mm....but you can make your own
Need a G17 duty holster (no SURPA) level 2 or 3.
Disassemble holster
First, cut the top straight down the middle.
Second, remove the inner lining (its glued in an can be a real pill to pull out)
Make sure the new holster now fits the gun
Snip a long peice from the inner lining and glue on top to maintain shape (peice needs to be oversized)
Use a sodding iron to join the glued plastic to the holster.
Shape as needed (You might put in an optics cut)
Need a G17 duty holster (no SURPA) level 2 or 3.
Disassemble holster
First, cut the top straight down the middle.
Second, remove the inner lining (its glued in an can be a real pill to pull out)
Make sure the new holster now fits the gun
Snip a long peice from the inner lining and glue on top to maintain shape (peice needs to be oversized)
Use a sodding iron to join the glued plastic to the holster.
Shape as needed (You might put in an optics cut)