This rifle was put together by myself and inspected, headspace checked and had the chamber polished by Alison & Carey Gunworks in Portland, Oregon. It has fired approximately 300 rounds overall.
It started it's life as an Aero AC-15 rifle and got a massive overhaul...
The build:
-Rebel Arms 4150 CMV Nitride 14.5" med contour barrel 1/7 twist - 1 MOA barrel
-Low profile .750 gas block with melonite gas tube (mid length gas system)
-Rebel Picmod handguard 13.5" (based off Bootleg design) with BCM KMR anti-rotation system
-Rail Scales FDE
-Daniel Defense keymod QD socket
-VLTOR MUR1A upper receiver complete (heavier duty than standard AR-15 upper receivers)
-Sharps XPB bolt carrier group with relia-bolt (S7 steel)
-Radian Raptor LT FDE charging handle
-Magpul STR FDE stock with comfort cheekweld pad
-Magpul MIAD two-tone grip (comes with extra backstrap options)
-CMC 3.5lb single stage flat trigger
-Aero Precision pinless billet trigger guard
-Strike Industries Link angled foregrip
-Magpul polymer BUIS
-SilencerCo Trifecta Muzzle Brake pinned and welded per ATF reg.
A pinned and welded brake is no good for a thread mount suppressor. Fortunately, this brake will accept the original Saker QD suppressor mount (not the ASR). SilencerCo has indicated to me that they will swap the ASR mount to the original Saker upon request if it is ordered.
Can consider including the following mags given the right deal:
- 3 FDE OK Industries Surefeed magazines
- 2 Magpul PMAG30 with Strike Industries extra 3 round extension baseplates
I've got close about $1,600 into this rifle alone excluding any optics - trade value will really just depend on what comes up. Right now I'm putting it at $1,300. It shoots great.
Looking for a CZ Scorpion Evo pistol, particularly a Micro conversion but that's not necessary. Would consider a trade for a B&T APC9 with some cash on my end. If you have something, throw it my way - it's worth a shot. Something high quality and with a lot of life left in it.
Meet at an FFL in Portland - Sportsman's Warehouse is my primary option.
*Also have a Primary Arms 1-8x sfp scope with Bobro QD mount at an additional cost if interested*
It started it's life as an Aero AC-15 rifle and got a massive overhaul...
The build:
-Rebel Arms 4150 CMV Nitride 14.5" med contour barrel 1/7 twist - 1 MOA barrel
-Low profile .750 gas block with melonite gas tube (mid length gas system)
-Rebel Picmod handguard 13.5" (based off Bootleg design) with BCM KMR anti-rotation system
-Rail Scales FDE
-Daniel Defense keymod QD socket
-VLTOR MUR1A upper receiver complete (heavier duty than standard AR-15 upper receivers)
-Sharps XPB bolt carrier group with relia-bolt (S7 steel)
-Radian Raptor LT FDE charging handle
-Magpul STR FDE stock with comfort cheekweld pad
-Magpul MIAD two-tone grip (comes with extra backstrap options)
-CMC 3.5lb single stage flat trigger
-Aero Precision pinless billet trigger guard
-Strike Industries Link angled foregrip
-Magpul polymer BUIS
-SilencerCo Trifecta Muzzle Brake pinned and welded per ATF reg.
A pinned and welded brake is no good for a thread mount suppressor. Fortunately, this brake will accept the original Saker QD suppressor mount (not the ASR). SilencerCo has indicated to me that they will swap the ASR mount to the original Saker upon request if it is ordered.
Can consider including the following mags given the right deal:
- 3 FDE OK Industries Surefeed magazines
- 2 Magpul PMAG30 with Strike Industries extra 3 round extension baseplates
I've got close about $1,600 into this rifle alone excluding any optics - trade value will really just depend on what comes up. Right now I'm putting it at $1,300. It shoots great.
Looking for a CZ Scorpion Evo pistol, particularly a Micro conversion but that's not necessary. Would consider a trade for a B&T APC9 with some cash on my end. If you have something, throw it my way - it's worth a shot. Something high quality and with a lot of life left in it.
Meet at an FFL in Portland - Sportsman's Warehouse is my primary option.
*Also have a Primary Arms 1-8x sfp scope with Bobro QD mount at an additional cost if interested*
Last Edited:
I've got a pretty specific direction I want to go. I'll give it awhile to see if anything is out there...if not, I'll probably repost as a WTS ad for a lower cash price.
