I have been researching for several weeks now and I have reached my decision.I was considering a Dan Wesson but I have settled on building my own 10mm 1911 from a Fusion Scout kit. I have spoken to Bob and he is quite the nice guy. I am having him bob tail the frame and checker the trigger guard to suit my style of shooting. I can hardly wait to get this thing and start putting it together. So, the configuration will be as follows:
This high quality kit comes with the following:
- Fitted frame (bob tailed) & Slide "forged"
-Custom Flat top slide with rear Sure-Grip cocking serrations
-Lowered and Relieved ejection port
-Frame milled for Fusion, STI, Wilson barrel ramp cut
-Fitted ramped match barrel, barrel link and link pin
-Fitted stainless steel 400 Series heat-treated barrel bushing
-Fitted slide stop
-Extended Ejector installed
-Plunger tube installed
-Recoil system with full length guide rod, recoil spring and cap
- Undercut trigger-guard
-30 LPI Checkered front strap
-Beveled magazine well
-.25 Radius cut for high-ride beavertail
-Rear Sight cuts (Novak or Bomar style)
-.330 x 65 deg x .070 front sight cut
-All parts matte bead blast finished
Recoil Spring Set-up Kit 10 mm, 20lb, 22lb, 24lb
Magazine Release Spring
Firing Pin Spring
1911 Colt ELLIASON, NIGHT SIGHT SET, Gold CUP
Extractor, 1911 Stainless steel, 9mm/10mm/38 Super
Firing pin 70/80 series 9mm/38S / 10mm
Firing pin stop plate, 9mm/10mm, milled for ADJ sight
Recoil Spring Guide, 2pc, Full Length SS, w/cap 5" Std
Grip Bushing, Slim Line, SS Set of 4
Grip Safety, Hi-ride Beavertail, Stainless
Grip Screw KIT, Slim Line, Stainless, TORX w/wrench, Set of 4
Lock, Mag Catch, Stainless
Mag Catch - Extended, Stainless
Mainspring Housing, Stainless ARCHED Checkered
Pin, retaining for ejector, 5 pack
Thumb Safety EXTENDED Stainless - Tactical Pro-Series
Trigger Group, 1911 Hi-Impact CF
The final gun will sport a black frame and slide with matte stainless external controls and parts giving it a bit of (but not too much of) a two tone effect. It should look similar to the one below but bob tailed.
Whatcha all think?
This high quality kit comes with the following:
- Fitted frame (bob tailed) & Slide "forged"
-Custom Flat top slide with rear Sure-Grip cocking serrations
-Lowered and Relieved ejection port
-Frame milled for Fusion, STI, Wilson barrel ramp cut
-Fitted ramped match barrel, barrel link and link pin
-Fitted stainless steel 400 Series heat-treated barrel bushing
-Fitted slide stop
-Extended Ejector installed
-Plunger tube installed
-Recoil system with full length guide rod, recoil spring and cap
- Undercut trigger-guard
-30 LPI Checkered front strap
-Beveled magazine well
-.25 Radius cut for high-ride beavertail
-Rear Sight cuts (Novak or Bomar style)
-.330 x 65 deg x .070 front sight cut
-All parts matte bead blast finished
Recoil Spring Set-up Kit 10 mm, 20lb, 22lb, 24lb
Magazine Release Spring
Firing Pin Spring
1911 Colt ELLIASON, NIGHT SIGHT SET, Gold CUP
Extractor, 1911 Stainless steel, 9mm/10mm/38 Super
Firing pin 70/80 series 9mm/38S / 10mm
Firing pin stop plate, 9mm/10mm, milled for ADJ sight
Recoil Spring Guide, 2pc, Full Length SS, w/cap 5" Std
Grip Bushing, Slim Line, SS Set of 4
Grip Safety, Hi-ride Beavertail, Stainless
Grip Screw KIT, Slim Line, Stainless, TORX w/wrench, Set of 4
Lock, Mag Catch, Stainless
Mag Catch - Extended, Stainless
Mainspring Housing, Stainless ARCHED Checkered
Pin, retaining for ejector, 5 pack
Thumb Safety EXTENDED Stainless - Tactical Pro-Series
Trigger Group, 1911 Hi-Impact CF
The final gun will sport a black frame and slide with matte stainless external controls and parts giving it a bit of (but not too much of) a two tone effect. It should look similar to the one below but bob tailed.
Whatcha all think?
Last edited by a moderator:
