1. Sign up now and join over 35,000 northwest gun owners. It's quick, easy, and 100% free!
  2. The lucky winners of the NWFA Fall Giveaway 2016 have been announced!
    Dismiss Notice

I've Decided To Be A Fusion 10mm Owner

Discussion in 'Handgun Discussion' started by arjunki, Nov 16, 2009.

  1. arjunki

    arjunki Beaverton Active Member

    Likes Received:
    I have been researching for several weeks now and I have reached my decision.I was considering a Dan Wesson but I have settled on building my own 10mm 1911 from a Fusion Scout kit. I have spoken to Bob and he is quite the nice guy. I am having him bob tail the frame and checker the trigger guard to suit my style of shooting. I can hardly wait to get this thing and start putting it together. So, the configuration will be as follows:
    This high quality kit comes with the following:
    - Fitted frame (bob tailed) & Slide "forged"
    -Custom Flat top slide with rear Sure-Grip cocking serrations
    -Lowered and Relieved ejection port
    -Frame milled for Fusion, STI, Wilson barrel ramp cut
    -Fitted ramped match barrel, barrel link and link pin
    -Fitted stainless steel 400 Series heat-treated barrel bushing
    -Fitted slide stop
    -Extended Ejector installed
    -Plunger tube installed
    -Recoil system with full length guide rod, recoil spring and cap
    - Undercut trigger-guard
    -30 LPI Checkered front strap
    -Beveled magazine well
    -.25 Radius cut for high-ride beavertail
    -Rear Sight cuts (Novak or Bomar style)
    -.330 x 65 deg x .070 front sight cut
    -All parts matte bead blast finished
    Recoil Spring Set-up Kit 10 mm, 20lb, 22lb, 24lb
    Magazine Release Spring
    Firing Pin Spring
    Extractor, 1911 Stainless steel, 9mm/10mm/38 Super
    Firing pin 70/80 series 9mm/38S / 10mm
    Firing pin stop plate, 9mm/10mm, milled for ADJ sight
    Recoil Spring Guide, 2pc, Full Length SS, w/cap 5" Std
    Grip Bushing, Slim Line, SS Set of 4
    Grip Safety, Hi-ride Beavertail, Stainless
    Grip Screw KIT, Slim Line, Stainless, TORX w/wrench, Set of 4
    Lock, Mag Catch, Stainless
    Mag Catch - Extended, Stainless
    Mainspring Housing, Stainless ARCHED Checkered
    Pin, retaining for ejector, 5 pack
    Thumb Safety EXTENDED Stainless - Tactical Pro-Series
    Trigger Group, 1911 Hi-Impact CF

    The final gun will sport a black frame and slide with matte stainless external controls and parts giving it a bit of (but not too much of) a two tone effect. It should look similar to the one below but bob tailed.
    Whatcha all think?

  2. huntpotter

    huntpotter SW WA Negotiator Bronze Supporter

    Likes Received:
    That will be sweet. I've built on a Fusion frame before, They are excellent quality.
  3. arjunki

    arjunki Beaverton Active Member

    Likes Received:
    Thanks Hunt,I think she ought to make a fine woods companion. Don't you?