Got a SBR/NFA question

[dee151]

So with the new bill that pass, for SBR, does this mean I can take my SB3 brace off my 300 blackout and put a rifle stock on it? Or it does not work like that?

Read More

 

[bcp]

From all I've read, all requirements are still in force. Only the tax stamp cost has changed, after the change date arrives.

Bruce

 

[Camelfilter]

So with the new bill that pass, for SBR, does this mean I can take my SB3 brace off my 300 blackout and put a rifle stock on it? Or it does not work like that?

You have to engrave your lower & file paperwork just like always. Then wait for approval BEFORE installing a stock.

From all I've read, all requirements are still in force. Only the tax stamp cost has changed.

Bruce

This.

Not sure when the cost change goes into affect. Some say Oct, others say Jan...

(thread title edited)

 

[dee151]

From all I've read, all requirements are still in force. Only the tax stamp cost has changed.

Bruce

Ok so what Exactly does that mean for me? I don't own any Suppressors or a SBR so I have no experience in this part of laws or what I would need to do.

 

[Camelfilter]

Ok so what Exactly does that mean for me? I don't own any Suppressors or a SBR so I have no experience in this part of laws or what I would need to do.

All NFA laws apply. There is zero change to them.

Edit, adding:

Simplest would be for you to set up your own Silencerco Silencershop account. Then go to Black Flag Armory & use the Silencerco Silencershop kiosk to read your full finger print sets.

Then, ask down there specifically how to go about doing whatever is you want to do...

 

[bcp]

You have to apply for and receive a tax stamp same as before. Only the cost has changed.

Bruce

 

[CamoDeafie]

@Camelfilter and @bcp are both right; the only change is the cost of the tax stamp ($0) for NFA items that are not machine guns or destructive devices.

As for the date?

July 4th is when Trump signed.
This part, Page 455, Lines 14-16 after the NFA tax reduction part;

Makes it clear that Jan 1st 2026 is the next calendar quarter beginning more than 90 days after July 4th, because there are literally less than 90 days from July 4th to Oct 1st 2025 (calendar Q4). Edit, as of today the 5th, there are 88 days to Oct 1st, 2025
.

 

[Camelfilter]

Everyone REALLY needs to be aware that violating NFA regulations can be super duper bad news...

 

[CamoDeafie]

Everyone REALLY needs to be aware that violating NFA regulations can be super duper bad news...

Yup. 10 years in Club Fed, loss of 2A rights for life, and a honking big fine of $250,000 for individuals, $500,000 for organizations

 

[PiratePast40]

There are quite a few tutorials out there. Here's one of them from Gun Builders Depot.

Here's the ATF site for forms and instructions. Here's the form with instructions.

It sounds more intimidating than it really is.

You can go through Silencerco if you'd like to have a company guide you through it.

If you think you might be doing mare than just a couple, getting digital fingerprints is also an option. Just do an internet search and you'll find out where and how. If I remember correctly, you need to make sure you put the purpose of the finger prints into the form so that it has the correct format. AFIK, they really don't check your fingerprints against a database, just keep them on file.

 

[TTSX]

Ok so what Exactly does that mean for me? I don't own any Suppressors or a SBR so I have no experience in this part of laws or what I would need to do.

For you it means you own a braced pistol and literally nothing that directly affects you has changed. If you would LIKE to install a stock, you would need to form 1 an SBR just like you always have. Depending on exactly when you do that paperwork, there may or may not be a $200 tax. That's it.

 

[Juniper9mm]

You can also talk to John @Wellburn's Guns on Hwy 62 heading towards White City. They have always been very helpful.

 

[spookshack]

OP, @wired has a tutorial here on the forum explaining the process for suppressors but it's the same for SBR's.

Form 1 silencer tutorial

Ive been asked to do a form 1 tutorial. I know theres quite a few of these out there but heres my take. Ive gotten to the point where as soon as I order a receiver or gun I prefill out a form 1 on eforms and while the dealer is running the BGC I enter the serial number on my phone and have it...

www.northwestfirearms.com

 

[Kruel J]

OP, @wired has a tutorial here on the forum explaining the process for suppressors but it's the same for SBR's.

That's what I used for my SBR. Worked great.

 

[spookshack]

That's what I used for my SBR. Worked great.

Same here.

 

[VinnieBoomBah]

Everyone REALLY needs to be aware that violating NFA regulations can be super duper bad news...

Quoted for truth!

 

[wired]

We need people to violate the NFA rules so someone will have standing in court to challenge the law. Come on guys. Take one for the team.

 

[CamoDeafie]

We need people to violate the NFA rules so someone will have standing in court to challenge the law. Come on guys. Take one for the team.

How about you....? Whoever proposes such, shall be the first to volunteer..... Else they be shamed

 

[wired]

How about you....? Whoever proposes such, shall be the first to volunteer..... Else they be shamed

Only if someone will comfort my wife while I'm in the pokey.

 

[CamoDeafie]

Only if someone will comfort my wife while I'm in the pokey.

Got pics?

Hey, maybe she could start an OF and pose with your NFA Trust things if they don't get forfeited